Craftsman 98020 Operator's Manual

Operator's Manual
40v MAX* Lithium Trimmer / Edger
Model- 98020
KEY iNFORMATiON YOU SHOULD KNOW:
• The guard must be installed before trimming or edging - if not, the motor will
overheat (page 8).
• When replacing the line, use only .065 inch diameter ROUND line (Craftsman_ Model
#98030 is recommended) - otherwise the tool will not function properly (page 11).
• Do not bump the feed head against the ground - it will disrupt the feed mechanism.
• For use only with Craftsman_'40v Max* batteries.
zLCAUTION: Read, understand and follow
all Safety Rules and Operating Instructions
in this manual before using this product.
Sears Brands Management Corporation,
Hoffman Estates, IL 60179 U.S.A.
See the full line of Craftsman ® products
at craftsman.corn
Part No. 90616328 REV01
• SAFETY
• OPERATION
• MAINTENANCE
• TROUBLESHOOTING
• ESPANOL PG. 15
*Maximum initial battery pack voltage (measured
without a workload) is 40 volts. Measured under a
workload, nominal voltage is 36.
*El maximo voltaje inicial del paquete de baterias
(medido sin una carga de trabajo) es 40 voltios. Si se
mide con una carga de trabajo, el voltaje nominal es 36.
March 2015