W
- M
I
S
A L L
O U N T
N F R A R E D
E N S O R
Figure 5
Installing the
Connector
NOTE:
Certain "old work" or "retro-fit" boxes, such as the
Carlon B225R, have a plastic "lip" which interferes with the
Decora plate screws. This lip prevents you from being able
to tighten these screws completely. To make the clearance nec-
essary for these screws, you must remove the parts of the lip
causing the interference. There are two ways to accomplish this:
1. Drill through the lip of the box at the screw points.
2. Cut notches into the lip with a pair of diagonal cutters.
10