Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Bacsa BLP-545
- Page 1 BLP-545 User's Manual Versión 15.05.16...
-
Page 3: Table Of Contents
USER’S MANUAL MANUAL CONTENTS 1. INTRODUCTION.................... 1 LP2550 LABELLER’S CHARACTERISTICS ..............1 INSTALLING THE LP-2550 LABELLER ................. 2 ADVICE FOR MAINTENANCE AND CARE OF THE LP-2550 LABELLER....2 2. OPERATING THE LP-2550 ................3 SWITCHING ON THE LP-2550 ..................3 PROGRAMMING THE BACKLIGHTING ................ - Page 4 INDICATOR-LABELLER BLP-545 TOTAL CLEAR OF THE LP-2550................. 23 6.1.1 Items clearance ......................23 GENERAL SET-UP....................... 23 6.2.1 Setting 00: Bar code....................24 6.2.2 Setting 01: Calculating change ................... 24 6.2.3 Setting 02: Set tare ..................... 24 6.2.4 Setting 03: Set price....................25 6.2.5 Setting 04: Paper type....................
- Page 5 USER’S MANUAL 6.13 COPIES OF TOTAL LABELS ..................43 6.14 EAN-13 DENSITY ......................43 6.15 CONTROL OF LABEL AT EXIT..................44 6.16 NUMBER OF COPIES OF LABELS ................44 7. PROGRAMMING LOGOS ................44 PRINTING LOGOTYPES....................44 LOADING LOGOS ......................44 8.
-
Page 7: Introduction
INDICATOR-LABELLER BLP-545 1. INTRODUCTION LP2550 LABELLER’S CHARACTERISTICS LP 2550 1000 32/64 SÍ SÍ • Alphanumeric display. • Backlighting. • Connectors for external signal La LP-2550 has the following status indicators: • Zero indicator • Stable weight indicator • Sales assistants : indicate if a sales assistant memory is engaged in an operation. -
Page 8: Installing The Lp-2550 Labeller
USER’S MANUAL INSTALLING THE LP-2550 LABELLER Follow the instructions below to ensure correct installation and operation of the labellers. 1. Check that the mains voltage corresponds to that stated on the specifications label on the labellers and that it does not fluctuate in excess of 10% of nominal voltage. 2. -
Page 9: Operating The Lp-2550
INDICATOR-LABELLER BLP-545 2. OPERATING THE LP-2550 SWITCHING ON THE LP-2550 Having ensured that the labelling machine is correctly installed, press the on-off switch located at the back of the labelling machine. LP-2550 V-100 After providing information on the model, program version... -
Page 10: Reset
USER’S MANUAL To fix the price, press F . (consult sec. 6.2.3 Set price) 2.050 12.50 Whenever the weight is removed, the price is not 0.000 25.60 automatically cleared to zero, but stays at the fixed value; press the corresponding sales assistant’s memory key to store. -
Page 11: Discounts
INDICATOR-LABELLER BLP-545 Discounts 2.5.1 To enable a discount on a line (per item sold) the item must 2.050 12.50 be registered as a P.L.U. It works this way: 0.000 25.60 1. Place the item on the platform. − − − −... -
Page 12: Review Transactions
USER’S MANUAL If delay mode has been enabled (set-up 20≠0) the time in seconds must be entered. Repetition is cancelled when another PLU is selected. REVIEW TRANSACTIONS Before concluding and printing the receipt of a transaction, you can review and modify it. To do so: Subtot 1. -
Page 13: Forms Of Payment
INDICATOR-LABELLER BLP-545 FORMS OF PAYMENT At the receipt printing stage, having pressed the ∗ ∗ ∗ ∗ total key, a TOTAL number (from 0, which is the default value, to 4 will show up) indicating the customer’s form of payment. the sales assistant choose the form of payment. -
Page 14: Connection For External Signal
USER’S MANUAL 2.11 CONNECTION FOR EXTERNAL SIGNAL An external device can be enabled via a 24 Vcc, 1A pulse, which lasts 100msec. This is enabled on the following occasions: ∗ ∗ ∗ ∗ O1 1. When a receipt(or a copy of the same) is to be printed: ∗ ∗ ∗ ∗ followed by one of the memory keys. -
Page 15: Delete Sales Totals
INDICATOR-LABELLER BLP-545 To enable the printing of headers on lists: 1. Press the sequence ∗ ∗ ∗ ∗ F 0 7 9 0 ∗ ∗ ∗ ∗ F 0 7 9 0 Prog. 2. Press 0 and then ∗ ∗ ∗ ∗... -
Page 16: Quick Change Of Plu Price
USER’S MANUAL To do an inventory of an item, proceed as follows: 1. Place the item on the weighing dish. 0.205 0.00 0.000 Invent 2. Select the item. 0.205 333.33 3. Press a memory key to print a receipt indicating the 0.000 Invent date, time, memory with which you are working and the... -
Page 17: Programming Items,Tares, Sales Assistants & Batch Number
INDICATOR-LABELLER BLP-545 3. PROGRAMMING ITEMS,TARES, SALES ASSISTANTS & BATCH NUMBER TOTAL CLEARANCE OF THE LP-2550 It does a total memory clear of the labelling machine LP- 2550: ∗ ∗ ∗ ∗ F 0 7 9 0 Pro9. 1. Enter programming. - Page 18 USER’S MANUAL 8. Enter the number of the section to which the item belongs as a number between 1 and 9. 1P.L.U. 01 With it you can obtain a list of sales according to sections. SECT. Press the to move on to program the label format..
-
Page 19: Programming Vat Rates
INDICATOR-LABELLER BLP-545 15. Enter text 4. It is a line of text which allows 256 bytes in length, with a capacity for 252 letters. 1P.L.U. 01 T4.001. 0 If they are ingredients, up to 128 Ingredients. Text and ingredients can be combined on the same line, and can be linked to other lines of ingredients. -
Page 20: Registering And Removing Sales Assistants
USER’S MANUAL 3. Press ∗ ∗ ∗ ∗ as many times as is necessary for the display to ∗ ∗ ∗ ∗ Prog. Tar show the tare corresponding to the one to be 0.000 programmed (T1-T9). TARE 4. Enter the value of the tare weight by placing the weight ... -
Page 21: Batch Number
INDICATOR-LABELLER BLP-545 BATCH NUMBER The batch number does not depend on the PLU nor on the label format. SHIFT TOT2 Press SHIFT TOT2. BATCH NO. Enter a maximum number of 999999. When a total memory clear or reset is done, the batch number is set at 0. -
Page 22: Printing Batches
USER’S MANUAL Function Delete batch Delete field Move on to next field ∗ ∗ ∗ ∗ Save data, move on to next Forward batch no. Backward batch no. PRINTING BATCHES Press SHIFT and PLU SHIFT PLU Batch Select the label batch numbers Press ∗... -
Page 23: Setting Up The Printer
INDICATOR-LABELLER BLP-545 4. SETTING UP THE PRINTER With this type of programming you can define the way the labelling machine works. To do so: ∗ ∗ ∗ ∗ F 0 7 9 0 Prog. 1. Press the sequence ∗ ∗ ∗ ∗ F 0 7 9 0. -
Page 24: Receipt & Label Design
USER’S MANUAL 5. RECEIPT & LABEL DESIGN RECEIPT DESIGN A total of 8 lines as receipt headers can be programmed, each of 13 or 26 characters depending on the body size. To do so: Function Return to programming position. Clear data. Print stored lines. -
Page 25: Label Design
INDICATOR-LABELLER BLP-545 4. The third digit to appear indicates printing contrast. Enter value 4 for good printing quality in the receipts (default value). CONTRAST Press + + + + to move on enter the text of the line being + + + + programmed. - Page 26 USER’S MANUAL 6. Use the numeric keyboard to enter the code of the section (A) you wish to be printed on the label (consult the table below) If editing a format which has already been defined, press the + + + + or − − − − key access the field you wish to modify. Section Description Section...
- Page 27 INDICATOR-LABELLER BLP-545 In the case of barcodes, a height of up to 31.5 mm is permitted. If it is a totals label, the Total Weight is printed in the weight position and the Total Amount in that corresponding to the amount.
-
Page 28: Format Copy
USER’S MANUAL Width x 4, Height x 3 Width x 3, Height x 4 Width x 5, Height x 4 Width x 4, Height x 5 Width x 2, Height x 4 Width x 2, Height x 5 Width x 1, Height x 1 Width x 1, Height x 1 Width x 1, Height x 1 Width x 1, Height x 1... -
Page 29: Set-Up
INDICATOR-LABELLER BLP-545 6. SET-UP Operation of the LP-2550 can be personalized by taking the following steps and assigning the correct values to set-up parameters. TOTAL CLEAR OF THE LP-2550 ∗ ∗ ∗ ∗ F 0 7 9 0 Prog. 1. Press the ∗ ∗ ∗ ∗ F 0 7 9 0 keys to enter programming. -
Page 30: Setting 00: Bar Code
USER’S MANUAL Setting 00: Bar code 6.2.1 This is to inform the LP-2550 if it is to issue a bar code, and when it is to do so: 0. Bar code on the receipt when the total is positive. (Default value) 1. -
Page 31: Setting 03: Set Price
INDICATOR-LABELLER BLP-545 Setting 03: Set price 6.2.4 Depending on this set-up, the LP-2550 can set a fixed price or not. (on pressing F , the price typed in the labelling machine will not be deleted on removing the product from the platform). -
Page 32: Setting 05: Enable Multiplication
USER’S MANUAL Setting 05: Enable multiplication 6.2.6 With this setting, you can decide if the LP-2550 can carry out multiplication operations. To do so: 1. Enter general set-up mode and seek parameter 05, ∗ ∗ ∗ ∗ F 0 7 9 0 4 SET05 whose two possible values mean the following: ∗... -
Page 33: Setting 08: Enable Subtotal
INDICATOR-LABELLER BLP-545 Setting 08: Enable subtotal 6.2.9 With this setting you decide if the LP-2550 can review transactions. To do so: 1. Enter general set-up mode and seek parameter 08, ∗ ∗ ∗ ∗ F 0 7 9 0 4... -
Page 34: Setting 11 :Register Chit
USER’S MANUAL Setting 11 :Register chit 6.2.12 With this setting you choose how the labelling machine is to operate with regard to the register chit. To do so: 1. Enter general set-up mode and seek parameter 11, ∗ ∗ ∗ ∗ F 0 7 9 0 4 SET11 whose 4 possible values mean the following: ∗... -
Page 35: Setting 14: Ean 13 Format
INDICATOR-LABELLER BLP-545 Setting 14: EAN 13 format 6.2.15 With this setting you choose the contents of the bar code (the special one designed by the user in secs. 6.2.22 and 6.2.23 or the one the LP-2550 incorporates by default) which is to be printed on the receipt and label. -
Page 36: Setting 15: Show Tare Weight
USER’S MANUAL Setting 15: Show tare weight 6.2.16 With this parameter you set the LP-2550 to show the weight value on the tare display. To do so: ∗ ∗ ∗ ∗ F 0 7 9 1. Enter general set-up mode and seek parameter 15, SET15 whose two possible values mean the following: ∗... -
Page 37: Setting 19: Without Weighing
INDICATOR-LABELLER BLP-545 Setting 19: Without weighing 6.2.20 SET19 This setting is enable operation with or without weighing ∗ ∗ ∗ ∗ F 0 7 9 0 4 platform. WITHOUT ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ 19 WEIGHING 0. Operation with weighing platform. -
Page 38: Setting 24: Ean 128 Format
USER’S MANUAL Setting 24: EAN 128 Format 6.2.25 This parameter determines the content of EAN 128 to be printed on the label. Proceed as follows: ∗ ∗ ∗ ∗ F 0 7 9 0 4 SET24 1. Enter general configuration mode and find parameter ∗... -
Page 39: Setting 80: Bar Code On Receipt
INDICATOR-LABELLER BLP-545 Setting 80: Bar code on receipt 6.2.29 This setting will only show up in programming if the current ∗ ∗ ∗ ∗ F 0 7 9 0 4 SET80 01 32m value of setting 14 is 1,3 or 5. -
Page 40: Setting 85: Global Ean 128
USER’S MANUAL Setting 85: Global EAN 128 6.2.34 This parameter only appears in programming if the current value of parameter 24 is 0. This is for designing the global EAN 128. Proceed as follows: ∗ ∗ ∗ ∗ F 0 7 9 0 4 1. -
Page 41: Currencies
INDICATOR-LABELLER BLP-545 CURRENCIES Here the LP-2550 is programmed with the two currencies which are to be printed. The available currencies are: Code Currency DESCRIPTION DEUTSCHMARK DUTCH GUILDER Lux F LUXEMBOURG FRANC POUND STERLING FRENCH FRANC AUSTRIAN SCHILLING Sw F SWISS FRANC... -
Page 42: Change Of Currency
USER’S MANUAL CHANGE OF CURRENCY To program exchange rate of the different currencies, take the following steps: Prog. ∗ ∗ ∗ ∗ F 0 7 9 1. Enter programming according to the sequence ∗ ∗ ∗ ∗ F 0 7 9 0. -
Page 43: Editing Ean 128
INDICATOR-LABELLER BLP-545 Editing EAN 128 6.5.1 The structure of an EAN 128 is as follows: START + FNC1+ IA→DATA + IA→DATA+..Char Meaning Obtained: where: <TOT 3> +<0> Start A START (start A, start B or start C) is the special character that indicates that the characters that follow <TOT 3>... - Page 44 USER’S MANUAL Net volume in litres 315 (c) n4+n6 Net volume in cubic metres 316 (c) n4+n6 Net weight in pounds 320 (c) n4+n6 Net weight in kilograms 330 (c) n4+n6 Length or first measurement in metres (logistics) 331 (c) n4+n6 Width, diameter or second measurement in metres (logistics) 332 (c)
- Page 45 INDICATOR-LABELLER BLP-545 The length of the data depends on the IA. Some fields are of a fixed length and others are variable. All positions must be completed in fixed-length fields. If not all the positions are completed in variable-length fields, the FNC1 character must be entered at the end in order to indicate end of field.
-
Page 46: Header Lines
USER’S MANUAL HEADER LINES This parameter sets the labelling machine to print the header ∗ ∗ ∗ ∗ F 0 7 9 lines on the lists or not Prog. 1. Enter programming according to the sequence ∗ ∗ ∗ ∗ F 0 7 9 0. -
Page 47: Programming Date Format On Labels
INDICATOR-LABELLER BLP-545 PROGRAMMING DATE FORMAT ON LABELS Press the sequence ∗ ∗ ∗ ∗ F 0 7 9 0 to enter programming ∗ ∗ ∗ ∗ F 0 7 9 0 Prog. Press PLU 8 Enter the date format in accordance with this table:... -
Page 48: Automatic Weighing Mode
USER’S MANUAL 6.10 AUTOMATIC WEIGHING MODE Once this option is enabled and an item is fixed with the F key, a label is printed whenever the weight is stabilised: ∗ ∗ ∗ ∗ F 0 7 9 0 Prog 1. Enter programming according to the sequence ∗ ∗ ∗ ∗ F 0 7 9 0. -
Page 49: Discount Mode
INDICATOR-LABELLER BLP-545 Discount mode 6.10.2 This mode allows you to discount from the accumulated totals. ∗ ∗ ∗ ∗ 1. Press ∗ ∗ ∗ ∗ You move between discount mode and accumulate mode. 2. The message shows on the alphanumeric line for 1 sec. -
Page 50: Control Of Label At Exit
USER´S MANUAL 6.15 CONTROL OF LABEL AT EXIT This permits the detector of labels at the exit to be activated or deactivated. Test mode must be activated for this purpose. To enter test mode, switch on the equipment, and when the countdown commences, press * and 25 simultaneously. - Page 51 INDICATOR-LABELLER BLP-545 To better understand how the logo is loaded, its use is explained by this example: - let us suppose that we have the image shown below: Once you have obtained the image, run the DibalRMS program and the following screen displays:...
- Page 52 USER´S MANUAL Open the Set-up/Section data menu: Once the following screen displays, press Set-up...
- Page 53 INDICATOR-LABELLER BLP-545 screen in which you can select the logos box displays, and the following screen displays: Seek the directory where the logo required to be loaded is located, for example, the logo loaded is the file DibalPP.BMP. Select the position in which it is to be loaded, for example 1, remember there are 32 types.
- Page 54 USER´S MANUAL To transmit this logo to the labelling machine, open the menu: Scales/Operations with Scale.
- Page 55 INDICATOR-LABELLER BLP-545 Select Shop/Section/Labelling machine and the Start of Day operation. Then, press COMMUNICATE and the PC will transmit all the logos to the labelling machine.
-
Page 56: Appendix
USER´S MANUAL 8. APPENDIX SUMMARY OF ACCESS TO PROGRAMMING To access the different programming options press the sequence ∗ ∗ ∗ ∗ F 0 7 9 0 and then the corresponding key in accordance with the table: PROGRAMMING EURO Stage (5.3), Stability (5.7), Headers Lists (5.8), Inventories (2.14) Programming Items (3.2) Programming Header Lines (6.8) -
Page 57: Character Codes
INDICATOR-LABELLER BLP-545 Replace the lid on the printer and place the weighing platform by following the steps described in point 1 in inverse order. To work in label mode set-up parameter 4 must be at 5. CHARACTER CODES The table below shows the letter codes necessary for programming the names of items (chapter 3 PROGRAMMING ITEMS AND TARES) as well as the texts of header lines of the receipts (chapter 4 RECEIPT DESIGN). - Page 58 USER´S MANUAL Code SPANISH CZECH - SLOVAK BULGARIAN GREEK POLISH Α Ç Β ç ∆ Á Á Ъ Ą Φ À Ä Ь Ć Γ Â Č Ю Ę Ä Ď Я Ł Λ É É Ë Ń Π È Ĕ...
-
Page 59: Ingredient Codes
INDICATOR-LABELLER BLP-545 Greek Cyrillic Substituted Greek Cyrillic Substituted Character Character Character Character А а Б б ν В в Г г Д д Е е Ж ж З з И и Й й К к Л л М м η... - Page 60 USER´S MANUAL 0368 BRUSSELS SPROUTS 0106 ANTICOAGULANTS: 0211 COCKLE 0316 HEMP 0369 CAULIFLOWER 0107 ANTI-FOAMING AGENT 0212 COCKLES 0317 SNAIL 0370 CAULIFLOWER 0108 ANTI-FOAMING AGENTS 0213 AUBERGINE 0318 SNAILS 0371 COLOMBIA 0109 ANTI-FOAMING AGENTS: 0214 AUBERGINES 0319 CARAMEL 0372 COLOURING MATTER 0110 ARTIFICIAL FLAVOURING 0215 WATERCRESS 0320 LIQUID CARAMEL...
- Page 61 INDICATOR-LABELLER BLP-545 0420 COTTAGE PIGEON 0643 E-127 0688 E-219 0421 AUTHORIZED COMP. 0500 DATE 0644 E-131 0689 E-220 0422 FRUIT JAM 0501 DATES 0645 E-132 0690 E-221 0423 SOYA CROCANTI 0502 DEXTROSE 0646 E-140 0691 E-222 0424 PORK CUTLET 0503 SEA DELICACIES...
- Page 62 USER´S MANUAL 0915 FRUIT 1034 GREEN PEPPERS 0733 E-336 0779 SWEETENERS: 0916 FRUITS 1035 PEAS 0734 E-337 0780 ARTIFICIAL SWEETENER 0917 COLD MEAT 1036 POMEGRANATE 0735 E-338 0781 ARTIFICIAL SWEETENERS 0918 COLD MEATS 1037 GRENADINE 0782 ARTIFICIAL SWEETENERS: 0736 E-339 0919 COLD COOKED HAM 1038 GALACTOSE 0920 FRUCTOSE...
- Page 63 INDICATOR-LABELLER BLP-545 1160 H-5812 1205 H-8110 1252 BONE 1113 LIVER 1161 H-5813 1206 H-8131 1253 BONES 1114 PORK LIVER 1115 GOOSE LIVER 1162 H-5814 1207 H-8140 1116 FIG 1300 INGREDIENTS 1163 H-5816 1208 H-8162 1301 - INGREDIENTS: 1117 FIGS 1164 -5817 1209 H-8186 1118 –...
- Page 64 USER´S MANUAL 1849 PIG’S MUZZLE 1662 WHOLE MILK POWDER 1610 COW’S MILK 1850 PIG’S MUZZLE 1611 SKIMMED MILK 1851 BOVINE MUZZLE 1800 MACARONI 2100 GOOSE 1612 SUCKING PIG 1852 MUZZLE 1801 MAGNESIUM 2101 GEESE 1613 LETTUCE 1853 PIG’S MUZZLE 1802 LEAN MEAT 2102 PORT 1614 LECITHIN 1854 PIG’S MUZZLE...
- Page 65 INDICATOR-LABELLER BLP-545 2234 PAPRIKA 2402 CURD CHEESE 2288 FATTY PARTS 2617 SEED 2235 PEPPER 2403 BURGOS CHEESE 2289 BREADCRUMBS 2618 SEEDS 2236 PEPPERS 2404 GOAT’S CHEESE 2290 FATTY PARTS OF FOWL 2619 SEMOLINA 2237 GREEN PEPPERS 2405 SHEEP’S GEESE 2291 FATTY PARTS OF PIG...
- Page 66 USER´S MANUAL 2804 TEA 3104 VERMOUTH 2805 VEAL 3105 VINEGAR 2806 INK 3106 VINEGAR WINE 2807 BACON 3107 WINE 2808 TOMATO 3108 WHITE WINE 2809 TOMATOES 3109 SHERRY 2810 THYME 3110 PORT WINE 2811 TOASTED 3111 RIOJA WINE 2812 WHEAT 3112 ROSÉ...
-
Page 67: Specifications Of The Lp-2550
INDICATOR-LABELLER BLP-545 SPECIFICATIONS OF THE LP-2550 • POWER SUPPLY ...............220VAC, 50 Hz, 1A. • EXTERNAL/INTERNAL BATTERY............24Vcc,7.5A • PRINTING METHOD ..............thermal (8 dots/mm) • DISPLAY ................LCD display/backlighting • MAX. SIZE LABELS............... 60 mm X 150 mm • COMMUNICATIONS PORT TO PC ..........RS 232 8 paths •... -
Page 68: Programming Animals
USER´S MANUAL Programming animals 8.7.2 The LP-2550 can programme up to 50 animals, numbered from 1 to 51 (NRA). To programme the animals: 1. Enter programming, by pressing the following sequence of ∗ ∗ ∗ ∗ F 0 7 9 0 keys : ∗... - Page 69 INDICATOR-LABELLER BLP-545 12. Program the CATEGORY field as a 3-character word. Press NdA 01 01 X to move on to the next field. Cat. 13. Program the BREED field as a 20-character word. Press X to move on to the next field.
-
Page 70: Table Of Countries
USER´S MANUAL Table of countries 8.7.3 01 ALBANIA 36 PHILIPPINES 70 OMAN 02 GERMANY 37 FINLAND 03 ANDORRA 38 FRANCE 71 PANAMA 04 SAUDI ARABIA 72 PARAGUAY 05 ALGERIA 39 GEORGIA 73 PERU 06 ARGENTINA 40 GHANA 74 POLAND 07 AUSTRALIA 41 GREECE 75 PORTUGAL 08 AUSTRIA... -
Page 71: Printing Receipts
INDICATOR-LABELLER BLP-545 + or – NdA 02 Use the + and – keys to seek the next and previous animal programmed in the LP-2550, respectively. The numeric keyboard can also be used to enter the number of the required animal. To save the association , press ∗ ∗ ∗ ∗ .
Need help?
Do you have a question about the BLP-545 and is the answer not in the manual?
Questions and answers