Advertisement
T
A B L E
9
-
I
T O P
N F R A R E D
Troubleshooting
This manual contains
cific information on the adjustment and operation of your
Niles infrared extender system, please refer to the instruction
manual included with your Niles IR Main System Unit
(MSU140, MSU250, MSU480 MSU440Z, IntelliControl).
The bi-color blue/green LED on the front of the TS100 is a
useful troubleshooting aid.
The blue LED should light only when a remote command is
being received. If the LED on the TS100 "flickers", and the
TS100 functions normally, there is no cause for concern, some
stray IR signal are being received by the TS100 but are not
being repeated.
1. Test the remote control(s) by operating the A/V equipment
directly. Replace the batteries if needed.
2. Double check the cable connections on all TS100's and on the
main system unit. Look for open, shorted or reversed wires.
3. Test for interference from the following sources:
• Neon or halogen lights in the room
• Light dimmers, beginning with those closest to the TS100
Observe the TS100's LED while performing all the tests. It is
possible to have interference from more than one source.
R
E M O T E
S E N S O R
instructions for the TS100 only. For spe-
Advertisement
