[Text Stamp] - Panasonic DMC-FS15 Operating Instructions Manual

[MULTI] setting
1
In step , delete all the texts, select [EXIT], and press [MENU/SET].
4
2 Press [MENU/SET] to close the menu.
Note
• Text can be scrolled if all of the registered text does not fit on the screen.
• The name setting of [BABY1]/[BABY2] or [PET] in scene mode or [LOCATION] in travel date
can also be registered by using the operation in steps
• The name setting of [BABY1]/[BABY2] or [PET] in scene mode, [LOCATION] in travel date and
[TITLE EDIT] cannot be registered at the same time.
• You can print out texts (comments) using the "PHOTOfunSTUDIO" bundled software on the CD-ROM (supplied).
• You can set up to 50 pictures at one time with [MULTI].
• You cannot use title edit for the following pictures.
– Motion pictures
– Protected pictures
– Pictures recorded with other equipment
You can stamp the recording date/time, age, travel date or title onto the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] mode menu. (P20)
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Select the picture, and then press
[MENU/SET] to set.
• ['] appears on screen if the picture is
stamped with text.
[MULTI] setting
Press [DISPLAY] to set (repeat), and
then press [MENU/SET] to set.
• The setting is cancelled when [DISPLAY]
is pressed again.
Press 3/4/2/1 to select [SHOOTING DATE], [AGE], [TRAVEL DATE]
or [TITLE] and then press [MENU/SET] to set each item.
[SHOOTING DATE]
[W/O TIME]:
[WITH TIME]: Stamp the year, month, day, hour and minutes.
[AGE] (P50)
If this is set to [ON], [AGE] is stamped on the pictures.

[TEXT STAMP]

Stamp the year, month and date.
and following.
4
[SINGLE]
Press 2/1 to
select the picture.
Advanced (Playback)
] will be
[MULTI]
Press 3/4/2/1 to
select the pictures.
VQT1W46
75