Page 1
English Axis CD-ROM Server Quick Installation Guide...
Page 2
Quick Installation Guide This guide covers the installation and basic configuration procedures for Windows for Workgroups, Windows 95, OS/2 and UNIX environments. For advanced configuration and further customizing, please consult the AXIS 850/950 User’s Manual. Front: Indicators Back: SCSI Connector...
3. Set the SCSI address of the external drive. Each connected drive must have a unique SCSI address. SCSI addresses 0 through 6 may be used. For Axis 851 and Axis 951 SCSI address 0 is used for the internal drive.
Example: (The commands may be different on your system.) > cd /var/yp > make 4. Send the IP address to the CD-ROM server. The ethernet address or node address is your CD-ROM server serial number divided into six groups of two digits each.(See the example below.) arp -s <host name>...
Page 5
2. Send the IP address to the CD-ROM server. The ethernet address or node address is your CD-ROM server serial number divided into six groups of two digits each.(See the example below.) arp -s <IP address> <ethernet or node address>...
Page 6
3. Right-click the CD folder in the right listing to map the server. Windows 3.x (NetWare) 1. Start the File Manager and select Connect Network Drive… from the Disk menu. 2. Select the entry for your new CD-ROM server. The default name , where are the last six digits of AXIS<nnnnnn>_NW <nnnnnn>...
Page 7
Example: (For a CD-ROM server with serial no. = net use E: \\AXISDB000B\cd UNIX (NFS) To mount the CD-ROM server on a UNIX system do the following: 1. Create a directory for the CD-ROM server. mkdir <directory> 2. Mount the CD-ROM server.