Advertisement
H
D
S
S
S
I G H
E F I N I T I O N
P E A K E R
E L E C T I O N
Y S T E M
4. Turn on the amplifier or receiver and select a source, such
as the tuner or CD player.
5. Slowly turn up the amplifier or receiver volume and set it
to a comfortable (not maximum) listening level. Be careful
not to overdrive or "clip" your amplifier. If the sound
becomes muddy or distorted, you have reached the limit of
your amplifier's volume capability and should quickly reduce
the volume to avoid damaging your speakers.
6. To turn off one or more speaker pairs, simply press the
corresponding ON/OFF button(s) on the HDL-6. Refer to the
Protection chart for the correct setting of the PROTECTION
button.
Constant Protection Switch
The HDL-6 is equipped with a manual override for the pro-
tection circuit that enables you to defeat the front panel pro-
tection switch and maintain constant impedance protection.
This will safeguard your amplifier from being overdriven due
to accidental or improper use by anyone unfamiliar with the
equipment.
To engage this override, move the rear panel "CONSTANT
PROTECTION" switch to the "ON" position. Constant imped-
ance protection will be maintained until the switch is turned
to "OFF".
13
Hide quick links:
Advertisement
