Subscribe to Our Youtube Channel
Summary of Contents for SimplyShade SS-SERENATA
- Page 1 Serenata Umbrella Light SS-SERENATA POWER DOWN TIME VOL- VOL+ FM/AM I n s t r u c t i o n M a n u a l...
- Page 2 Thank you for your purchase of SimplyShade’s Serenata Wireless Umbrella Light and Media Center. Please remove all contents from the package, inspect and review checklist. CAUTION: To reduce personal injury and damage to your umbrella light, read and follow this assembly and operation guide.
- Page 3 Note: It may be necessary to squeeze the 2 lock and release tabs on the Serenata to fit onto post. (See page 7) For SimplyShade sidepost cantilever style umbrellas, attach Serenata onto adapter on lower hub. For all other sidepost cantilever styles, attached supplied Adapter Sleeve (G) and Universal Hub Adapter (H) to the lower hub and tighten with supplied screws.
- Page 4 S T E P 3 Adjusting the Light Settings a. To turn on the lights, switch the battery pack to the “ON” position (Fig. 4). b. To adjust the brightness, simply press the “F/C” button on the Serenata (Fig. 5) or press the “LIGHT (+ or -)”...
- Page 5 S T E P 4 Programming the Radio a. Switch the battery pack to the “ON” position. b. Press the “POWER/FM/AM” button on the Serenata (Fig. 7) or press the “Power” button on the remote control (Fig. 8). c. Position the Serenata for proper reception. (Fig.
- Page 6 S T E P 5 Using the Radio a. Turn the radio on and tune-in the station you want to save. b. Press & hold the “P/S” button for at least two seconds on the Serenata (Fig. 14) or on the remote control (Fig. 15). The P/S channel will flash on the display screen.
- Page 7 S T E P 7 a. Press & hold the “F/C” button on the Serenata (Fig. 18) or the remote control (Fig. 19) for at least 2 seconds. Fahrenheit will display on the screen. b. Press & hold the “F/C” button again for at least 2 seconds and Celsius will display on the screen.
-
Page 8: Additional Features
(Fig. 21) (Fig. 22) To OPEN and ATTACH SERENATA to SimplyShade Umbrella: Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 23). Slide the Serenata onto light adapter or center post. It may be necessary to squeeze the 2 lock and release tabs on the Serenata to fit onto post (Fig. - Page 9 To OPEN and ATTACH SERENATA to a non-SimplyShade Umbrella: Remove screw from cantilever hub (Fig. 27a). Remove second screw diagonally from other screw (Fig. 27b). Screw Adapter Sleeve to Universal Hub Adapter and tighten (Fig. 28). (Fig. 27a) (Fig. 27b) (Fig.
- Page 10 Hold Serenata firmly and pull the battery pack from umbrella light (Fig. 32). Slide the Serenata onto Universal Hub Adapter or center post (Fig. 33). If using Universal Hub Adapter, swap out cushion grips with smallest cushion grip size. For all other hubs or center post, change cushion grip size if necessary.
-
Page 11: Warranty
WARRANTY: upon issuance of an RA # and inspection by our QC department will credit or replacement of umbrella be issued. It is The manufacturer warrants that this the customer’s responsibility to pay the umbrella, when subject to normal and freight on return products or proper use, will be free from replacement parts. - Page 12 ©2015 SimplyShade - All Rights Reserved. 7/15...
Need help?
Do you have a question about the SS-SERENATA and is the answer not in the manual?
Questions and answers