Niles iC2 Manual page 28

ACCESSORIES
CS12V CURRENT SENSING 12 VOLT TRIGGER
FG01173
Activates voltage controlled
devices by turning on another
component. Current-sensing
makes it compatible with any 110V
electrical device
LS-1 LIGHT SENSOR
FG00728
Senses the brightness of a
component's front-panel display
and outputs a 12V DC sync signal
when the display is brightest
APC-2 CURRENT-SENSING OUTLET SWITCHER
FG00254
Accessory 12Volt DC power
adaptor. Provides enough current to
trigger up to six automated
switchers; also used for status on
receivers with switched outlets
1.25A 12VDC UNIVERSAL POWER SUPPLY
FG01035
Current outlet provides 12V DC
sync connection via an accessory
cable to the HT-MSU
IR/RF TESTER
FG00727
Dual LED design visually confirms
the receipt of a valid RF command
at the MSU
26
(CONTINUED)
EXPANSION ACCESSORIES
PAR4 SIMPLIFIED INFRARED ROUTER
FG01172
Routes IR commands to four
components. Compatible
with all brands of A/V equipment
and remote controls. Used for iC2
TV Array feature
RADIO FREQUENCY GATEWAY (RFG & RFG EX)
FG01407 NORTH AMERICA
FG01408 INTERNATIONAL
An optional device that can be
used instead of the supplied
���
����������������
�������
antenna; allows the Zigbee radio
antenna to be placed up to 100
meters (330 feet/100 meters)
away from the HT-MSU