Inserting the CF card 3.3.2 Ejecting the CF card Connectors LED-Diagnosis Connection to Host Approvals for USA and Canada FCC Approval for USA FCC Approval for Canada Appendix Beckhoff support and service 5.1.1 Beckhoff support 5.1.2 Beckhoff service Beckhoff headquarters CU8800-0000...
All the components are supplied in particular hardware and software configurations appropriate for the application. Modifications to hardware or software configurations other than those described in the documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH. 1.2.2 Description of safety symbols The following safety symbols are used in this operating manual.
2.1 Introduction CU8870 is the Beckhoff CF card adapter for USB for DIN rail.The CF card can be used in industrial environment as process and control data storage. Any control with a USB port can be supplied with a CF storage. The device can be easiely mounted on the DIN rail.Other outstanding features are:...
Product Overview 2.2 Technical Data Product name CU8870-0000 Number of USB type B ports (upstream) Number of CF cards slots Supported standard USB 1.1, USB 2.0 Supported baud rates 12 Mbit/s, 480 Mbit/s Status display 3 LEDs USB wiring length...
The product is characterized by small overall installed size. With a height of 100 mm, the module dimensions exactly match those of the Beckhoff Bus Terminals. Together with the lowered connector surfaces, this means that it can be used in a standard terminal box with a height of 120 mm...
Installation 3 Installation 3.1 Mounting / Unmounting The USB-Extender-Tx CU8870-0000 can be snapped onto a 35 mm mounting rail conforms to EN 50022. To release the CU8870-0000 from the mounting rail • first pull the lug at the bottom of the hub downwards by using a screw driver (1.) •...
2 mA 10 mW CF card Idle 1 mA 5 mW CF card Access 20 mA 100 mW 3.2.2 UL requirements Danger To meet the UL requirements, the USB hub CU8800-0000 must not be connected to unlimited power sources! CU8870-0000...
Beckhoff Automation GmbH.) They possess a higher number of read / write cycles and an enhance temperature range (up to + 85°C). A proper operation of the device can only be guaranteed with the use of CF cards from Beckhoff Automation GmbH! 3.3.1...
(see chapter power supply for details) lights green Device is operational CF LOCK no CF card inserted lights green CF-card is inserted and electrical connected ACCESS no access on the media flashes Read / write access on the media CU8870-0000...
Installation 3.6 Connection to Host The CF card reader is connected to a USB host via a standard USB cable. The maximum length for the wire is 5 meters. For correct operation, use USB 2.0 suitable wire. CU8870-0000...
4.2 FCC Approval for Canada FCC: Canadian Notice This equipment does not exceed the Class A limits for radiated emissions as described in the Radio Interference Regulations of the Canadian Department of Communications. CU8870-0000...
+ 49 (0) 5246/963-0 Fax: + 49 (0) 5246/963-198 e-mail: info@beckhoff.de Web: www.beckhoff.com The addresses of Beckhoff’s branch offices and representatives round the world can be found on her internet pages: http://www.beckhoff.com. You will also find further documentation for Beckhoff components there. CU8870-0000...