LENCO BT-160 User Manual page 5

③ Dial Back the call
Double press the button, Dial the last call back
LED Themes
Short press to switch the LED Themes, there are five different LED themes
Please note: The Club and Equalize themes only display when music playing
1. AUX in
Use the 3.5mm audio cable included to connect the speaker to an audio source (PC, MP3/MP4,
mobile phone). Short press the M button to enter "AUX IN" mode (the speaker will voice "Aux in"
mode). The speaker will play the music from the audio source.
Please note: Low battery will affect the music sound quality, please charge the speaker by adaptor (5V
1A) soon.
2. Charging
The speaker with the built-in lithium battery, use the USB cable included to connect the speaker to the
computer or a branded good quality 5V, 1A adaptor to charge the battery. When charging during power
switch is off, the LED indicator is orange-red, and when finished charging, the LED indicator will turn
blue.
Please note:
 If low capacity, the indicator light will flash quickly, please charge immediately.
 We recommend to charge the speaker by branded adaptor (5V 1A).
5