Nikon CAPTURE NX2 User Manual page 143

When this lens information is not available, the Intensity slider's range will be based on default lens
characteristics. To determine whether a given combination of lens and camera will record distance
information, see the table below.
Camera
D40, D40X, D50, D60, D70, D70S, D80, D100,
D2H, D2HS, D2X, D2XS, D200, D3, D300
D1X/D1H
(firmware version 1.10 or later)
D1X/D1H
(firmware version 1.01 or earlier)
D1
To apply vignette control to your image, follow these steps:
Click on the show/hide triangle next to Camera &
Lens Corrections.
Drag the Intensity slider to the right to brighten the
edges of the currently active photo, or drag the
Intensity slider to the left to darken the edges of the
photo.
If the image was taken under any situation in which
the distance information was not recorded, please
take care when adjusting the vignette control
settings so as to not over apply vignette control.
If you would like to remove the vignette control effect, click on the Reset button or uncheck the "Apply"
checkbox next to Vignette Control.
Type G or D lens
Distance information
recorded
Distance Information
recorded
Distance Information
not recorded
Distance Information
not recorded
Chapter 15 — Edit List
Any other type of lens
Distance Information
not recorded
Distance Information
not recorded
Distance Information
not recorded
Distance Information
not recorded
|
Develop Section
141