Table of Contents
Advertisement
Flash
BUILT-IN FLASH LAMP
When the camera is turned on, the default setting of flash mode is "No Flash". The
other flash modes can be set by using the Flash button. Press this button to toggle
between the three flash modes.
AUTOFLASH
A
NO FLASH
FORCED-FLASH
In autoflash ,the flash will fire automati-
cally when the light level is low or your
subject is backlit.
Use flash cancel when photographing
subjects that are beyond the flash range
or when flash photography is prohibited.
The flash will fire every time a picture is
taken, regardless of lighting. Use forced-
flash to reduce harsh shadows on your
subject's face.
Flash
CHANGING THE FLASH MODE
1. In Record mode, press the Flash button.
• The currently set flash mode appears on the
LCD monitor.
2. Repeatedly press the button.
• The flash mode on the LCD monitor
changes in cycle.
• Select the mode you desired.
NOTICE:
The default setting is No flash.
Under the capture mode of the sequence or video clip, the flash cannot be set up.
15
16
A
Advertisement
Table of Contents
