Triumph Spitfire MK3 Handbook page 11

CONTROLS, INSTRUMENTS AND INDICATORS
st
1 .. .. Move the lever left and forward
nd ..
2 .. Move the lever left and rearward
3rd .. Move the lever right and forward
4th (Top) .. Move the lever right and rearward
Reverse .. Press the lever downwards, move it to
the extreme left and forward. Engage
only when the vehicle is stationary
Always select neutral before starting the engine.
Handbrake Lever (14)
To apply the rear wheel brakes, pull the handbrake lever
upwards. It is retained in position by a ratchet and pawl.
10
Release the handbrake by pulling it slightly upwards before
depressing the button to free the pawl; then allow the lever to move
downwards to the "off" position.
Heater Blower Switch (15)
The blower motor, which is controlled by a toggle switch, may
be used to boost the flow of hot or cold air. Move the switch left to
operate the motor and right to switch off.
Heat Control (16)
The heat control operates a water valve which regulates the flow
of water through the heater unit. The control may be set at any
intermediate position as required. The water valve is closed when
the control is pushed in; maximum heat is available when the
control is pulled out.
Choke Control (17)
The choke control is used to enrich the fuel mixture for easy
starting from cold. Twist the control clockwise before pulling and
turn it anti-clockwise to lock in the desired position. (See "Starting
from cold" on page 26).
Clutch, Brake and Accelerator Pedals (19, 20, 21)
These are conventional items that need no further explanation,
except to remind the driver that needless wear of the clutch
mechanism will result from driving with the left foot resting on the
pedal.