Advertisement
Quick Links
PW33 User Manual
1 Introduction
Thank you for choosing our smart watch phone.
Watch phone S8 comes with Android 4.4 system, which supports GSM network (850MHz,
900MHz, 1800MHz, 1900MHz) and 3G network WCDMA 2100MHz. Basic functions of S8 are as
follows:
1. Screen resolution: 240*240 pixels, capacitive screen;
2. Built-in GPS;
3. MTK6572 chip;
4. 5M HD camera;
5. RAM: 512MB ROM: 4GB;
6. GPRS, EDGE, HSDAP, HSDAP+, Bluetooth 4.0, WiFi, USB2.0
1
Advertisement
Related Manuals for Flylink PW33
Summary of Contents for Flylink PW33
- Page 1 PW33 User Manual 1 Introduction Thank you for choosing our smart watch phone. Watch phone S8 comes with Android 4.4 system, which supports GSM network (850MHz, 900MHz, 1800MHz, 1900MHz) and 3G network WCDMA 2100MHz. Basic functions of S8 are as follows: 1.
-
Page 2: Safety Precautions
Note: For saving power consumption after using the watch, please deactivate GPS, WiFi and Bluetooth functions and return to the standby state. 2. Safety Precautions * Safety Warnings and Precautions Please read these precautions carefully before using the watch phone to ensure proper use of * Please turn off the watch when you are in the plane, hospitals or other places where cell phones are prohibited to be used. - Page 3 Please ensure the watch is free from damp, water or other liquids which will cause short circuit, leakage or other defects to the watch. 3 Preparations before Using the Watch A. Product Introduction 1: Speaker; 2: Volume; 3: USB Port; 4: Turn On/Off; 5: Camera; 6: MIC; 7: SIM Card Slot 8: 3 virtual buttons on the touch screen Option；...
- Page 4 C. Charge the battery The starting condition into the charging plug, the battery icon in the upper right of the screen intensity stripe rolling said charging has started, when the fringe fills the icon stops rolling, said battery charging has been completed, after charging pull out the plug; the off state to insert the charger plug screen battery icon started rolling, charging plug is completed Warning: When the battery is low, the screen will display warning information, when the battery is empty, the watch will automatically shut down.
- Page 5 4 Standby interface and clock 4.1 Analog clock: Press “power on” button shortly to turn on/off the analog clock 4.2 Main Menu：When the watch is standby, slip the screen to enter into main menu.
-
Page 6: Status Bar
4.2.1 Circles under the main surface means quantity of APP pages in the device, bright circle means current page. Slip the screen freely left or right, then click the Icon to your idea Apps. 4.2.2 Click the icon to enter into , slip the screen towards right, will enter into , you can check Contacts and Logs. - Page 7 Click to enter settings menu 1. Wireless&Network: Setup WLAN (WIFI), Bluetooth, traffic usage. 2. Device: Set the Scene Mode, Display, Storage,batteries. 3.Personal: set Location Information,Safe,Languages and Input Methods, Backing up and resetting and adding account 4. System: Set the Date and Time, Timer, Accessibility features, Developer options, about cell phones 6.2 Other features as follows ...
-
Page 8: Common Troubleshooting
7. Connect PC Watch will auto charging when connect with PC. Watch can be used as a U-disk: When connect watch with PC via usb cable, will display a dialog options as shown, confirm it as usb storage. If return then only charging. 8. - Page 9 • After charging parts of power, Battery level indicator might be inaccurate. Please wait about 20minutes to get the accurate indication after removing the battery charger. Cannot connect the network • Please try in another place • Please confirm the net service place from your network supplier •...
Need help?
Do you have a question about the PW33 and is the answer not in the manual?
Questions and answers