Page 2
We would like to congratulate you on your new receiver. With the purchase of the new SWISSPHONE DE900, you have decided on a device of the highest class. The SWISSPHONE DE900 receiver is distin- guished by the combination of an attractive design, the most simple operation and the highest quality.
Page 3
Return key (alternately display user – and status informati- change settings) on, leave selected menu or selected message) Switching the Receiver On By inserting the battery (refer to 0), the SWISSPHONE DE900 receiver is automatically switched on.
Menu Structure By pushing the confirmation key, directly the message selection for the 'Read messages' is displayed (boldface frame). When pushing the scroll key, the main menu is displayed (boldface broken line frame) Main menu 1st Sub-menu 2nd Sub-menu Read MESSAGES Message selection Delete...
Messages Read Messages A newly received message appears on the display immediately. The alerting is stopped by pushing any key. By pushing the scroll key, you can read the message. Only once you have scrolled right through to the end of the message it is considered as read. After the release time, the receiver reverts to the stand-by mode.
Deleting an Individual Message Point of departure : Stand-by mode Push the scroll key and the menu ‘MESSAGES’ is displayed. Push the confirmation key. With the scroll key, select the menu ‘Delete messages’ and push the confirmation key. With the scroll key select the message, which is to be deleted. Push the confirmation key to delete the message.
Page 7
The alerting on principle differentiates between messages with priority and without priority. This depends on the configuration of the corresponding address. In the alerting menu, the SWISSPHONE DE900 can be configured for silent alerting or loud alerting: Point of departure : Stand-by mode Push the scroll key and the menu ‘MESSAGES’...
Alarm Clock Point of departure: Stand-by mode Push the scroll key and the menu ‘MESSAGES’ is displayed. With the scroll key select the menu ‘ALARM CLOCK’. Push the confirmation key Switching the Alarm Clock On and - Off Point of departure : Menu alarm clock Push the confirmation key to select the menu ‘On/Off’.
Page 9
Number of read messages messages If the scroll key is pushed, the user information is displayed, otherwise the SWISSPHONE DE900 receiver goes into the stand-by mode after the release time. Direct display of the status screen and of the user information: If the receiver is in the stand-by mode, then by permanently pushing the return key the status information screen and the user information are alternately displayed for 2 secs.
Push the confirmation key. Selecting the Battery Type The SWISSPHONE DE900 receiver automatically identifies, whether an alkaline battery or a rechargeable battery is installed. The installed rechargeable battery type (NiMH or NiCd) can be configured here. Please ensure, that the installed rechargeable battery type corresponds with the setting in the device. This assures an optimum indication of the battery charge level.
Page 11
SWISSPHONE DE900 receiver. By inserting the battery, the SWISSPHONE DE900 receiver is automatically switched on. A system test follows by means of a brief activation of all consumers in the device. After this, the device is ready for operation.
Switching-on with Alarm Clock If the alarm clock is switched on and the receiver is switched off, then the SWISSPHONE DE900 will be switched on at the alarm time set and the alarm clock sounds. In order to set the alarm clock, please refer...
Need help?
Do you have a question about the DE900 and is the answer not in the manual?
Questions and answers