Download Print this page

Vantage Hearth Equinox EQ40TB-TI-II Installation Manual

Advertisement

Quick Links

V A N T A G E C O N T R O L S . C O M
1061 South 800 East, Orem, Utah 84097 ● Telephone: 801 229-2800 ● Fax: 801 224-0355
Overview
Vantage's Equinox 40 LCD Keypad has been
designed to be located in the same space as a
traditional keypad, installed in a single gang wall
box. Scalable designs from one, two, or three
pages allow a perfect fit in most areas. Each
keypad
can
be
configured
independent
mini-widgets,
eloquent choice for areas where lighting, AV
control, climate control, etc., are wanted, without the added
cost of a fully functional touchscreen or the wall clutter of
multiple gang keypads. Equinox 40 introduces Vantage's
commitment to a consistent user experience interface across
touchscreens, tablets, and smart phones. The interface uses
intuitive gestures; swipe left and right to change pages, touch
and release for normal button operation, or press and hold for
dim-cycle, volume controls, etc.
Features/Operations Overview
Fits US/European single-gang box or low voltage bracket.
Available in a "Black Glass" finish.
Power & communication over station bus.
Accepts Six-wire pigtail with all functionality.
Update firmware from Design Center. NOTE: Screen turns a
gradient green during a firmware update.
Built-in ambient light sensor for "Active," AUTO mode
screen brightness.
Built-in
proximity
activation,
programmed to execute a task with a hand wave across
front of station.
Proximity trigger will not re-trigger for 30 seconds
o
after no keypad usage or when the plus/minus signs
disappear (see Steps moving from active to inactive,
page 4).
Re-triggering may also be controlled through task
o
logic.
Up to three LCD pages available through Design Center
programming.
Each LCD page may have up to 5 scene buttons depending
on exclusion of AV mini-widget.
Raise/Lower graphical buttons via minus / plus (-/+) for
dimmable loads and volume control.
Text tracks status using two fixed colors for ON and OFF.
Dual operation mechanical button, bottom left and right;
left navigates to home screen or settings screens with
o
press and hold,
right may be programmed from Design Center.
o
Self discovering widgets for fast setup & programming.
Five programmable event sounds through Design Center.
Headers; select one of the following as a page header:
empty – displays nothing in the header;
o
temperature (only select one);
o
Internal temperature
External temperature
Heat set point
Cool set point
thermostat (select one thermostat only);
o
Displays internal temperature
Displays current mode setpoint – setpoint is
adjustable via minus / plus (-/+) buttons
Displays current mode – blue graphic for Cool,
red graphic for Heat, blue and red graphic for
Auto, and gray graphic for Off
Displays the word "heat" or "cool" and the
current mode graphic becomes more vivid when
system is actively heating or cooling
time – HH:MM format;
o
twelve hour clock only
weather;
o
Displays current outdoor temperature and a
graphic of current conditions.
AV mode – selecting an AV zone replaces bottom two
scene buttons on all three pages with pre-designed
common AV interface controls.
Local settings (accessed by a press and hold of Home
button);
volume (touch interaction audio feedback)
o
minus / plus (-/+) touch interaction volume
off when dark checkbox
Settings
o
©Vantage, 7/23/2015 / IS-0541-A
with
three
making
this
an
6"
maximum,
may
Equinox 40 LCD Keypad – MODEL: EQ40TB-TI-II
I N S T A L L A T I O N
Equinox 40 LCD Keypad – MODEL: EQ40TB-TI-II
Auto Mode option
Active & Inactive brightness settings
Advanced
Off When Dark option.
Station information
o
Firmware, graphics, boot code & eprom versions
Serial number
use infusion settings,* (Design Center settings)
option.
*NOTE: to unselect use infusion settings change any
setting on the Sound or Brightness setup screens.
Possible Screen Combinations:
1)
Header,
3) Scenes, Audio, 4) Scenes only.
Station Reset – simultaneously, press and hold both
mechanical buttons for one second. Do not touch the
screen when first powered or during the reboot process.
Specifications
Description
Dimensions, HWD
(at wall surface)
Dimensions, HWD
be
(overall)
Finished Weight
Power
Surge Suppression
Maximum LCD Control
Points (CP) including +/-
buttons (with 3 pages)
Maximum Gangs
LCD Button Status
Sound Option
Wiring Connections
Power for Aux. External
Devices
Station Bus Polarity
Station Wiring
configuration
Station Bus Specification
Station Buss Power Draw
Addressing
Finish
Glass Surface
Ambient Operating
Temperature
Ambient Operating
Humidity
FreeRTOS™
CE and RoHS Compliant
Character / Font Support
Equinox can render the following Unicode Codepoints*
Range
Typeface
U+0000 -
Rendered in
U+00FF
Gotham Book
U+0400 -
Rendered in Arial
U+06FF
Unicode MS
U+2700 -
Rendered in Arial
U+27FF
Unicode MS
U+3000 -
Rendered in Arial
U+30FF
Unicode MS
* NOTE: Proper computer/keyboard setup or copy/paste is
required to produce many international characters from the
above Unicode Codepoints.
V A N T A G E I N S T A L L G U I D E S
Low
trim
sets
minimum
percentage for auto mode,
Motion sense – sets proximity sensor's
sensitivity.
Scenes,
Audio,
2)
Header,
Specification
4.9" x 3.44" x 0.44"
124mm x 87mm x 11mm
4.9" x 3.44" x 1.5"
124mm x 87mm x 38mm
11.2 oz. or 317.5g
24V/36V via Station Bus
Yes
Scenes only – 45 CP max.
Scenes & Header – 47 CP max.
Scenes & AV – 37 CP max.
Scenes, AV, & Header – 39 CP max
Single Gang Only
Automatic (white = off, ochre = on)
Independent volume for each sound:
1 – touch interaction
5 – programmable event sounds
2 Wire 600V pigtail (included)
6 wire aux. pigtail (order separate)
15 mA @ 12V DC
Auto-Switching
Daisy-chain/Star/Branch
2C, 16AWG / 1.31mm2, twisted, non-
shielded, <30pF per foot. Separate a
minimum of 12" / 30.5cm from other
parallel communication and/or high
voltage runs.
2.85W on IC-24 / 2.85W on IC-36
self addressing through software
• TRIM - Titanium
• TOUCHSCREEN – Black Glass
Chemically Strengthened
32-95°F -or- 0-35°C
5-95% non-condensing
Real-time scheduling provided by
FreeRTOS (www.freertos.org)
Yes
Unicode Codepages (blocks)
Basic Latin, Latin-1 Supplement
Cyrillic, Cyrillic Supplement,
Armenian, Hebrew, Arabic
Dingbats
CJK Symbols and Punctuation,
Hiragana, Katakana
brightness
Scenes,
page 1 of 6

Advertisement

loading

Summary of Contents for Vantage Hearth Equinox EQ40TB-TI-II

  • Page 1 I N S T A L L A T I O N V A N T A G E C O N T R O L S . C O M V A N T A G E I N S T A L L G U I D E S Equinox 40 LCD Keypad –...
  • Page 2 I N S T A L L A T I O N System Requirements *Side View Illustration: Equinox 40 is compatible with InFusion Design Center version 3.1 software or higher. For new projects it is recommended that firmware and software be kept to the most current release.
  • Page 3 I N S T A L L A T I O N III. Design Overview Heat Cool Keypad Areas: Headers Auto Page Indicators Custom Scene Buttons Time Header: Displays current time hours and minutes. Controls • Weather Header Widget: Select Header Data Weather. Mechanical Create Weather...
  • Page 4 I N S T A L L A T I O N • Press and hold the home button to select one of the following Tuner Operation Detail Each Equinox 40 station, on a project, supports six, three categories: • independent, learnable presets for each tuner/band source Sound Settings –...
  • Page 5 I N S T A L L A T I O N (Configuration Screens continued) Tips/Troubleshoot - • Initially tuner presets are empty; the initial project file does not have tuner presets. • Tuner presets are read back in from system every time there is full program or firmware update once they exist.
  • Page 6 I N S T A L L A T I O N Equinox 40 –/+ (minus/plus) Adjust Buttons Descriptions For Press and Release or Press and Hold The following task procedures will cause the Equinox 40 to display the –/+ (minus/plus) adjust buttons and status bar. The percentage of change when tapping the minus/plus buttons is adjustable in Design Center by clicking on Settings | Procedure Preferences | System Defaults and adjusting the Bump Percentage (default is 10%).