Installation Guide (Smart Tv) - Odys Prime User Manual

(1): Select the OSD menu language.
(2): Select the mode for searching.
(3): Select the country for DTV and ATV reception.
(4): Select which type of channels you want to search.
Press ok to confirm.
The channel search starts now with ATV channel search.
- Press "Exit" to exit the channel search
searching.
- Press "TV menu" to skip the analogue TV (ATV) channel search.
If you skip ATV search the engine will proceed with DTV channel search.
11.3

Installation Guide (SMART TV)

This screen only appears when the TV first time turns on or reset to factory. You can choose
language and country, auto turning programs. Press Ok to continue.
NOTE:
We recommend to use a cabeled ethernet network connection. Please attach the network
cable before you switch on the engine.
If you are using a WIFI connection please take care that you select the correct network
and enter the correct wifi password. Plase enter the password correctely as it is and take
care of capital letters and special character.
Use the arrow keys in combination with the OK key to change the settings.
Select "DONE" and press OK to confirm each setting.
(1): Select the OSD menu language. Press
(2): Select the network connection.
(3): Enter the correct time zone. For central Europe please enter "+1".
(4): Enter the correct date.
(5): Enter the correct time.
36
ODYS PRIME
Welcome
Installation wizard!
Please follow some simple
steps to set up your SmartTV
Start configuration
eed searching.