Vibration Reduction - Nikon Coolpix P300 User Manual

Setup Menu

Vibration Reduction

Press the d button M z (Setup menu) (A142) M Vibration reduction
Set the vibration reduction function for taking still pictures and movies. Use to
correct blur, which is caused by the slight hand movements known as camera
shake that commonly occur when shooting at the telephoto zoom position or at
slow shutter speeds.
When the camera is stabilized for shooting with a tripod, set vibration reduction to
Off.
g
On (default setting)
Compensates for camera shake. The camera automatically detects the panning
direction and only corrects for vibration caused by camera shake.
When the camera is panned horizontally, for example, vibration reduction only
reduces vertical shake. If the camera is panned vertically, vibration reduction only
compensates for horizontal shake.
k
Off
Vibration reduction is disabled.
When vibration reduction is enabled, the current setting is displayed during
shooting (A6, 25). When Off is selected, an icon for the current setting is not
displayed.
B
Notes on Vibration Reduction
• After the power is turned on or the camera enters shooting mode from playback mode, wait until
the display stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
150