Table of Contents
Advertisement
2.3.1
Required Components
The adapter pair for C-Mount Cameras is pictured below. Handle
each part carefully. If any of the optics becomes dirty, refer to the
Maintenance section of this manual for cleaning instructions.
2.3.2
Assembly
1.
The FLA-C has an alignment pin on the inside wall.
Align the pin with the groove on the side of the CIU and
slide the CIU into the FLA-C.
2-18
9350BBA-C - The rear
module consisting of a 1" C-
Mount thread, detachable
power cable and plug cap.
9350FLA-C - This is the C-
Mount device into which th
objective lens is threa
Groove in CIU
Alignment Pin
e
ded to.
Hide quick links:
Advertisement
Table of Contents
