Table of Contents
Advertisement
Installation: LS 4800 with RS-232C
LS 4800
Scanner
LS 4800 System Components
1. Switch off all devices to be connected to the LS 4800
scanning system.
2. Connect the output cable into the port at the base of the
scanner's handle. Use the end indicated in the diagram.
• Plug in the modular connector.
• Twist the collar clockwise to snap into place.
3. If external power is required, connect the power supply to
the Power Adapter input port on the cable and then to a
receptacle supplying AC power of the proper voltage level.
Power
Adapter
Output
Cable
Connector
3
Host Device
Connector
Power
Supply
Advertisement
Table of Contents
