D-Link DHP-1565 Quick Installation Manual page 6

PRODUCT
SETUP
iNstallatioN - aP MoDe
ROOM A
Internet
DHP-1565 (Router Mode)
Existing Wall Wiring
ROOM B
DHP-1565 (AP Mode)
6
Game Console
Tv
Computer
INSTALL yOUR DEvICE
Plug the power cord of the DHP-1565
into an AC wall outlet close to your
Computer as seen in Room B. Confirm
the DHP-1565 is in AP mode and turn it
on by pushing the on/off switch located
on the back of the unit. Wait about 30
seconds for the DHP-1565 to boot.
Connect one end of the supplied CAT5
Ethernet cable to the Ethernet port on
the DHP-1565 and the other end to the
Ethernet port on your computer.
DHP-1565