Cabletech PIL0405 Owner's Manual page 5

Auto Searching Frequency Duplicator
Features:
• Copies frequency and codes instantly
• Automatically recognizes frequency
• Easy to use operation
Learning frequency range(MHz):
300, 306, 310, 315, 315.5, 330, 360, 390, 418, 430.5, 433.2,
433.92, 868.35, 286-361, 384-400
Programming the new remote:
1. Press button 1 of duplicator remote, when LED lights up, keep
on pressing the button 1 and press one of any other buttons
three times at the same time, the remote duplicator go into
duplicating standby state when the LED flashes 2 times. Then,
release the button which you pressed three times, but keep on
pressing button 1.
2. Put the original remote control and remote duplicator in a
short distance to copy, press the button of the original remote
control, and move it close to remote duplicator slowly, when
LED flashes three times, it means the code and frequency has
been copied, and you can release all the buttons.
3. Programming of other buttons are analogous to above instruc-
tions. The programmed button will be covered once it learns
new codes.
Note:
1. Some universal remotes need longer period of time to copy,
when you bring the original remote and the new one close.
The duplicator has strong self-adapting function, which can
improve sensitivity automatically. Please be patient until the
operation is finished.
2. If the programming operation was unsuccessful, please rele-
ase the key and repeat the operation.
Owner's manual
EN
5