Advertisement
Before you use your WESTECH Bluetooth Headphones
1. Charging the headphones.
Make sure that they are switched off. Insert the USB cable into a laptop or other device and
insert the Micros USB able into the space on the headphone. When you do this the indicator
light on the headphones should be red. When the red lights switches off, it means your
headphones are fully charged.
If the headphones light blinks red and blue, then this means the battery is low and needs
charging. You should charge the headphones for about 2 – 3 hours for them to be fully
charged.
2. Paring the headphones.
Your WESTECH Bluetooth head phones can be used with any device that has Bluetooth.
Before you use them you must 'pair' them with your Bluetooth device.
First switch on the headphones using the power button.
Next, select the Bluetooth option on your device and then select 'search for devices'. Your
device will now search for your headphones, when it finds them they should display as either
Headphones icon or as WESTECH or as NX-8252. Select this option and select 'Pair'.
Your Bluetooth device is now 'paring' with the Headphones. Wait until it says successfully
paired. Your device and headphones will now remember each other and so there will be no
need to repeat this process. Every time the headphones are switched on they will try and find
the nearest Bluetooth device and connect with the last one it was paired with.
3. Using the headphones.
Simply put on the headphones and any music that comes out of your device will be directed
to your headphones.
Advertisement
