Page 1
The New Generation of Wireless Access Control Systems User Manual for GC401-GC404 with firmware Ver. 0.41 and above, HW revision 03 For modules with serial numbers from 0011009 All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies 2010-06-09 US 1.02...
All rights reserved. MVC-Data ApS assumes no responsibility for any errors in this manual. MVC-Data ApS is constantly working to improve its products and offer new features in collaboration with customers and partners. Therefore, MVC-Data ApS reserves the right to change the hardware, software and / or specifications without notice and shall have no obligation to update the information contained in this manual.
(system administrators). The 8 digit master PIN code should be changed and is unique for each GC401-GC404 system. It can be entered from any Bluetooth enabled mobile phone. Please change the master PIN code before continuing.
AccessZone ® - GC400 Series – GC401-GC404 User Manual 8 System Commands This section describes the simple and easy to use mobile configuration command set for GC401 - GC404- the Wiegand series. Change 8 digit Master PIN Code Command This command changes the master PIN code which is used to validate all system commands. The system will automatically prompt the user for the Master PIN code.
The used Bluetooth device must also be configured to be visible from other Bluetooth devices to allow it to be detected by other Bluetooth devices. Please refer to MVC-Data “How to Get the Bluetooth ID” paper (http://www.mvc-data.com/Misc.html).
Need help?
Do you have a question about the GC401 and is the answer not in the manual?
Questions and answers