General safety precautions skid footwear are recommended when working outdoors. Wear protecting hair covering to contain long hair. WARNING! When using electric 9. Use eye protection. Also use face or tools, basic safety precautions should dust mask if the cutting operation is always be followed to reduce the risk of dusty.
ZENIT ТМ. Have your tool repaired by a qualified Model ZD-1100 M person. This electric tool is in accordance Rated power 1100 W with the relevant safety requirements. Rated voltage...
standard accessories 5. Selecting the appropriate drill bit. When boring concrete or stone use a concrete drill bit. Wrench 1 pc. When boring metal or plastic use an Side handle 1 pc. ordinary metalworking drill bit. Depth gauge 1 pc. When boring wood use an ordinary woodworking drill bit.
suited to the operation and then securely job. tighten the side handle grip. 5. Speed control dial. To attach a depth gauge on the side Speed is adjusted by turning the speed handle, insert the gauge into the control dial, which is located on the On/ U-shaped groove on the side handle, Off switch.
Page 7
The motor is equipped with carbon NOTE brushes, which wear with time. When Zenit Power Tools are constantly being a brush reaches the wear limit, the improved and modified to incorporate the motor may malfunction. If the engine is latest technological advancements. equipped with a disengaging brush, it Accordingly, some parts may be changed will automatically turn off.