Hardware Reset; Using The Stylus - Catchwell CW30 User Manual

Hardware Reset

It is recommended to use the hardware reset if the device does not work properly even
after performing the software reset. To perform the hardware reset, press the Reset
buttons on both the front and the back of the device at the same time.
• Do not perform the hardware reset frequently. It may cause damage or malfunction to the
device.
Caution
6

Using the Stylus

Stylus is used to execute commands or input data from the touch screen.
·Click
Tap an icon
once (to make a
selection or launch
an application
program).
• To ensure a prolonged use of the touch screen:
1. Clean it before use when any foreign material is on the screen.
2. Be careful not to make scratches while using the touch screen.
Note
3. Use only the provided stylus or the touch screen dedicated stylus, and do not use sharp
objects (pen, wire, screwdriver, or others).
4. Use a genuine screen protective film, and replace it periodically.
• Keep the device or the stylus out of children's reach.
Children may get hurt with the sharp end of the stylus.
Caution
·Double-click
Double-tap an icon
(to open a folder or
launch an application
program).
·Press and Hold
Press and hold until the
command menu appears on
the screen(to copy, paste,
delete files, make keyboard
entries, etc.).
·Drag
Press, drag, and release at
the desired location on the
screen (to select multiple
icons or to move icons).