Panel Facilities - Pioneer VSX-C402-S Service Manual

5

8. PANEL FACILITIES

Front panel
1 2
PHONES
1 PHONES jack
When headphones are connected there is no sound
output from the speakers.
2 STANDBY/ON button
Press to switch the receiver on or into standby.
3 FRONT INPUT jacks
Use to connect an audio/video component.
4 AV DIRECT indicator
Lights in standby when the receiver is passing an audio/
video signal from one SCART AV connector to another.
5 Digital surround format indicators
2 DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
6 Listening mode indicators
STEREO indicator
Lights when the source is stereo and/or the listening
mode has been set to STEREO.
2 PRO LOGIC II indicator
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
ADVANCED indicator
Lights when one of the Advanced Surround modes is
active.
PHONES indicator
Lights when phones surround mode is active.
SOUND MODE indicator
Lights when one of the Sound Modes is active.
5
6
3 4
STANDBY/ON
2
AV DIRECT DIGITAL
FRONT INPUT
DIGITAL IN
VIDEO L AUDIO R
6
7
5 6
2
DTS STEREO PRO LOGICII ADVANCED PHONES SOUND MODE
7 Remote control sensor
8 INPUT SELECTOR knob
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
9 MASTER VOLUME knob
Use to adjust the volume.
VSX-C402-S
7
8
7 8
VSX-C402
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
MASTER
INPUT SELECTOR
VOLUME
R
DOWN UP
8
A
9
B
C
D
E
F
107