Samsung GT-S3600L Service Manual page 53

11-2. Assembly
1
1) Put LCD F-PCB into the hole of LOWER.
2) Put LCD Ass'y in LOWER.
- Be careful not to make scratch and molding damage.
- Beware that you do not damage F-PCB
when you insert F-PCB to hole of LOWER
3
1) Assemble LOWER and UPPER from
upside.
- Be careful not to make scratch and molding damage.
- Check GAP is exist after finish assembly.
- Be careful not to damage LCD FPCB
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) Assembled LOWER and LCD module
(Don't Twist the MOTOR wire)
- Be careful not to damage Motor & Speaker wire
- Beware that you do not damage F-PCB
when you insert F-PCB to hole of LOWER
4
1) Screw up two screws at FOLDER LOWER
and put in screw caps.
- Be careful not to make scratch and molding damage.
11-5
Exploded View and Parts List