Table of Contents
Advertisement
Digital Convergence (cont.)
Helpful Hint
The procedures for aligning convergence for
each raster mode is identical. First align the
Green raster with a Convergence Alignment
Template. Then align the Red and the Blue
rasters to merge with the Green raster, using
the Yellow pattern (for the Red raster), Cyan
or White pattern (for the Blue raster). It is
highly
recommended
to
store
often
throughout the convergence procedure.
Exit
1
DatalCursor-
Red Raster
merged with
Using steps outlined
in
@
and
@
,
align
Red raster to merge
with Green.
Press Pattern Keys (1 or 3 on remote) as
Cyan or White
needed to display either the Cyan (Blue
Raster Pattern
+
Green) or the White (Red
+
Green
+
Blue) raster pattern.
Usin steps outlined
in
and
Q
,
align
(
Blue raster o merge
with Green.
Press Store Key (7 button on remote) to save
data in P-1
.
Store Data
Press Enter Key (ACTION button on remote)
Enter
(Action)-
R.G.B.
--
Selection
1
Pattern (Rev)
I
Store
- - I
Press Pattern Keys (1 or 3 on
Display Yellow
remote) as needed to display Yellow
Raster-Pattern
(Red
+
Green) raster pattern.
+
Mode
7-
!
r
position
1
poi n :[E"Gi e nce
-
OSD
ONIOFF
- -
Pattern/FWDI
(
END
, )
Clear
Press
Press
Exit Key (POWER button on remote)
Enter Key (ACTION button on remote)
Reminder
When completed, if no other alignments are
necessary, exit the Service Mode.
Press and hold ACTION and POWER
buttons together until the screen blanks.
The TV should reset itself and turn
itself back on in a few seconds.
Adjust TV for normal viewing.
Advertisement
Table of Contents
