Software Installation And Use - pitsco IMPULSEG II User Manual

8 . Make sure the finish end is prepared for the
launch with towels in place to stop the cars .
9 . Cock the launch pods using the switch on
the side of each pod – the switches will be in
the vertical position when cocked . Move the
safety lever to the On position (Figure 15) .
This will prevent accidental launches .
10 . Back each car into its pod, making sure each
car's cartridge is engaged in the firing sleeve .
The cars are now ready to launch .
To uncock the launchers, move the cars away
from the launch pods . Unlock the safety
levers . Firmly grasp the cocking levers and
slide them over to the Off position .

Software Installation and Use

Note: The Race Management software is only compatible with the Windows XP operating system .
1 . Insert the Race Management CD-ROM into your CD drive . The installer should autorun; follow
the instructions in the window .
2 . To use the software, launch Race Management . To learn more about using the software, see the
online help under the Help menu .
Got questions? We've got answers!
Figure 15
8 Call 800-358-4983