Table of Contents
Advertisement
IR implements direct convolution with VCS3 Spring Impulse <response
Sample.
Hybrid 1 perform an hybrid model between FDN/IR
Hybrid 2 perform an hybrid model between Parametric/IR
The last FTConv perform a convolutions between signal and IR pre-loaded
table in memory. Thus you can perform some interesting actions, (abbreviate
or retrograde IR) achieve very interesting results.
Spring crash use hardware accelerometer for triggering spring tilts, as the
original.
Ring Modulation
The Ring Modulation (i.e. RM) was one of the most recognisable effects used
by the BBC Radiophonic Workshop. It was the effect used to create the
voices of both the Cybermen and The Daleks for Dr Who.
The iVCS3 app implements three types of RM:
1) 'Ideal' performs a simple multiplication between two signals A and B;
2) 'VCS3' use a quadratic operator and can also simulate the vintage
leakage as the original;
3) 'Diode' is an implementation of Julian Parker's digital model of a Ring
Modulator. N.B. The RM 'Input A' is the Modulating Signal and the 'Input
B' is the Carrier Signal. By inverting the order you can achieve different
sound results.
Include in Presets
The switch in this section is designed to include or exclude the Matrix,
Keyboard, Sequencer, Control Manager and Knobs Color when you save new
preset.
Snapshot Pad Resolution Update sets the time interval for the
interpolations, from about 15 to 350 milliseconds. Short times for higher
resolution but higher consumption of CPU.
Save/Restore the Last App Setup, when you exit from the application, save
the status (all iVCS3 and Fx Parameters) and reload when next opening the
app.
Joystick Handle Springy, enable/disable.
Dropbox link/unlink account.
Advertisement
Table of Contents
