Ventura PB50 User Manual

PB50

User ManUal

Registration
For service and warranty please register your new Ventura Portable
Power Bank free at www.snooperneo.co.uk before use.
What's included?
Laser pointer
Red laser pointer
Capacity
Capacity indicator
indicator lamps
lamps
Power /
POWER Button
laser pointer button Laser pointer
button
Micro-USB
charger cable
Charging your Portable Power Bank
Use the micro-USB cable supplied to charge the unit from a PC or
laptop as indicated.
Checking the available battery capacity
To check the available battery capacity press the power button
once whilst no devices are connected. The green capacity indicator
lamps will illuminate to confirm the approximate capacity
remaining.
1 LED – approx. 0%-33% capacity
2 LED – approx. 34%-67% capacity
3 LED – approx. 68%-100% capacity
Charging devices using your Portable
Power Bank
Select the appropriate charging capable* to fit the device you
wish to charge. Connect the cable between the USB OUT socket
on your PB50 Power Bank and the charging socket on your device.
To commence charging press the power button once. The green
LED's will illuminate and one will flash indicating that the power
DC5V/1A OUT
DC 5V/1A OUT
bank is charging your device and the approximate battery capacity
LED Torch remaining
LED torch
SOS signal
SOS signal button
*Your Ventura PB50 Portable Power Bank comes with a micro-USB
DC5V/1A IN
DC 5V/1A IN
cable so is suitable for charging any device with a micro-USB socket.
LED torch /
LED torch button
If the device you want to charge has a different type of socket such as
SOS signal button
SOS signal button
an Apple connection, please use the charger cable provided with the
device you wish to charge.
User tip – if you are using the PB50 portable power bank in
conjunction with a Ventura portable solar power pack, you
Waterproof IP–67
l
can charge a device at the same time as using the solar pack
Dust-proof
l
to charge the PB50 power bank. Please refer to the Ventura
Drop resistant
l
portable solar power pack instructions for further details.
LED torch
Press the LED torch button once to power on the torch. Press the
LED torch button again to power off the LED torch.
SOS light
Press and hold the LED torch button for 3 seconds to activate the
SOS light signal. Press and hold the LED torch button for 3 seconds
to power off the SOS light signal.
Infrared laser pointer
Press and hold the power button for 3 seconds to power on the
infrared laser pointer. Press and hold the power button for 3
seconds to power off the infrared laser pointer.

Technical specification

Input DC5V-1A
Output DC5V-1A
Capacity 5600mAh
Size 28 x 56 x 102mm
Weight 140g
Service under Warranty
Your device comes with a standard one year manufacturer's
warranty.
If, for some reason, your unit requires service under warranty return
your device, via special delivery (insured) and in suitable packaging
to:
The Returns Department,
Performance Products Limited,
Cleaver House, Sarus Court,
Manor Park, Cheshire WA7 1UL
Enclose the following information:
(a) Your name, address and a full description of the problem.
(b) A telephone number where you can be reached during business
hours.
(c) Your units' serial number.
Disposal of Old Electrical & Electronic
Equipment
(applicable in the European Union).
This symbol on a product or its packaging
indicates that this product shall not be treated
as household waste. It should be handed
over to an applicable collection point for the
recycling of electrical equipment. By ensuring
that this product is disposed of correctly you
will help/prevent potential negative impact on
the environment. The recycling of materials will
help to conserve natural resources. For further
details about recycling please contact your local civic office or the
shop where it was originally purchased.
Disposing of the Battery
Please check with your local waste management service authority
regarding regulations for the safe disposal of the battery. The
battery should never be placed in municipal waste. Use a battery
disposal facility if available