Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for 7inova 7R300
Summary of Contents for 7inova 7R300
-
Page 1: Quick Installation Guide
3G Wireless Travel Router 150M Quick Installation Guide MODEL: 7R300... -
Page 2: Package Contents
3G internet. Under 3G Mode, the Ethernet port is used as LAN port. Router Mode Under Router Mode, the Ethernet port is used as WAN port. Connect 7R300 with ADSL Modem port using RJ45 cable. Computer/WI-FI phone/Tablet can connect the router wirelessly and share internet. - Page 3 7R300 Quick Installation Guide WISP+Bridge Mode Under WISP+Bridge Mode, the router can connect Wireless hotspot or wireless router, make wired device wireless ready, and bridge wireless signal, extend wireless signal range, Create a new SSID. The Ethernet port is used as LAN port. To avoid same IP address as front-end router, sers need to set different IP address.
-
Page 4: Device Connection
■ 1. Device Connection 1. To use 3G Mode, plug 3G modem into USB port of 7R300. 2. To use Wireless Router Mode, plug one side of RJ45 cable into 7R300’s Ethernet port, plug the other side into Modem’s LAN port... -
Page 5: Computer Configuration
3. To use WISP+Bridge Mode, connect 7R300 and device (Such as desktop computers) via RJ45 cable as following show 4. To use AP Mode, connect 7R300’s Ethernet port and network router’s LAN Port via RJ45 cable as following show ■ 2 Computer Configuration... -
Page 6: Connect To Wireless Network
7R300 Quick Installation Guide ■ 3 Connect To Wireless Network (Note: You have to get device connected wirelessly firstly then can login Web browser) Windows 7 Please click on the steps to set up Windows 7 system 1. After Wireless LAN card installed successfully, click icon on the lower right corner of desktop 2. -
Page 7: Easy Mode
7R300 Quick Installation Guide 4. When shows: “Connected”, means your computer has connected to wireless network successfully. ■ 4 Router Configurations Easy Mode 1. Open a web browser, type 192.168.2.1, and press Enter, type the password(default is admin). Click “login”... - Page 8 7R300 Quick Installation Guide 2. Open web browser, default into “Easy Mode” interface, select your wanted mode and do some simple configuration, or click “Advanced Mode” 3. According to the choice of mode for wireless parameters Settings 3G Router Mode Fill your 3G Account Info provided by network operator →...
- Page 9 7R300 Quick Installation Guide Router Mode Choice model. Static IP / DHCP / PPPOE 2.1 Static IP：Fill basic Info provided by network operator → Click “Apply”, reboot router 2.2 DHCP: Not set up → Click “Apply”, reboot router 2.3 PPPoE: Fill your Account and Password provided by network operator → Click “Apply”, reboot router After reboot, follow“5 reconnect router”...
- Page 10 7R300 Quick Installation Guide WISP+Bridge Mode Click “Scan”. Input same info as your connected Router’s → Click “Apply”, reboot router Select you wanted connected router’s SSID, click “Connect” → Click “Apply”, reboot router After reboot, follow “5 reconnect router” step and set up, then you can connect Internet.
- Page 11 7R300 Quick Installation Guide AP Mode Setup your info, easy to remember. Click “Apply”, reboot router After reboot, follow“5 reconnect router” step and set up, then you can connect Internet. Advanced Mode 1. Open a web browser, type 192.168.2.1, and press Enter, type the password(default is admin). Click “login”...
- Page 12 7R300 Quick Installation Guide 2. Click “Advanced Mode” upper-right corner 3. Click “Setup Wizard” in the left list, select your wanted mode, click“Enter the fast set” 4. According to the choice of mode for wireless parameters Settings 3G Router Mode Fill your 3G Account Info provided by network operator.
- Page 13 7R300 Quick Installation Guide Setup your info, easy to remember. Click “Save”, reboot router After reboot, follow“5 reconnect router” step and set up, then you can connect Internet. Router Mode Setup your info, easy to remember - 12 -...
- Page 14 7R300 Quick Installation Guide Choice model 2.1 Static IP：Fill basic Info provided by network operator → Click “Save”, reboot router 2.2 DHCP: Not set up → Click “Save”, reboot router 2.3 PPPoE: Fill your Account and Password provided by network operator → Click “Save”, reboot router After reboot, follow“5 reconnect router”...
- Page 15 7R300 Quick Installation Guide WISP+Bridge Mode Input same info as your connected Router’s Click “Scan”, select you wanted connected router’s SSID, click “Connect” Setup your info, easy to remember Static IP / DHCP / PPPOE - 14 -...
- Page 16 7R300 Quick Installation Guide 4.1 Static IP：Fill basic Info provided by network operator → Click “Save”, reboot router 4.2 DHCP: Not set up → Click “Save”, reboot router 4.3 PPPoE: Fill your Account and Password provided by network operator → Click “Save”, reboot router After reboot, follow“5 reconnect router”...
- Page 17 7R300 Quick Installation Guide ■ 5 Reconnect to Router Windows 7 1. Select the wireless network name configured in step 4, click “Connect” button. 2. If you encrypted wireless network in step 4, the following message will be displayed on web browser, fill in password, click “OK”...
- Page 18 Appendix：Troubleshooting What can I do if I forgot my password? 1) Restore the 7R300’s configuration to its factory default settings. (With 7R300 powered on, press and hold the Reset button for about 10 seconds before releasing it). 2)To log in the Web Management page, use the default user name and password: admin, admin. To connect to the Wireless Network, use the default password on the label.