7 Troubleshooting Guide
Use the self-check function to test the unit.
1. Checking the IIC bus lines
2. Power LED Blinking timing
7.1.
Check of the IIC bus lines
7.1.1.
How to access
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.
7.1.2.
Exit
Disconnect the AC cord from wall outlet.
7.1.3.
Screen display
7.1.4.
Check Point
Confirm the following parts if NG was displayed.
DISPLAY
Check Ref. No.
PEAKS
IC8000
TUN
TU6706
AVSW
IC3001
STBY
IC8000
MEM1
IC8902
MEM2
IC8900
ZWEI
ID
BT
IC8000,A21
WiFi
IC8000,A20
Description
Check Point
PEAKS
A-Board
TUNER
A-Board
AV SWITCH
A-Board
PEAKS(STM)
A-Board
PEAKS EEPROM
A-Board
NAND FLASH
A-Board
ZWEI
LCD PANEL
ID
A-Board
Bluetooth
A-Board/Bluetooth
WiFi
A-Board/WiFi
15