Canon EOS REBEL T6 (W) Basic Instruction Manual page 53

The <A> mode makes the colors look more impressive in nature, outdoor,
and sunset scenes. If you did not obtain the desired color tones, change the
mode to a Creative Zone mode and select a Picture Style other than
<D>, then shoot again.
FAQ
The focus indicator <o> blinks and focus is not achieved.

Aim the AF point over an area with good contrast, then press the
shutter button halfway (p.39). If you are too close to the subject,
move away and try again.
Multiple AF points flash simultaneously.

This indicates that focus is achieved at all those AF points. When the
AF point covering the desired subject flashes, take the picture.
The beeper continues to beep softly. (The focus indicator <o>

does not light up.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus indicator <o> does not light up.) You can take
sharp pictures of a moving subject.
Note that the focus lock (p.53) will not work in this case.
Pressing the shutter button halfway does not focus on the

subject.
If the focus mode switch on the lens is set to <MF> (manual focus),
set it to <AF> (autofocus).
A Fully Automatic Shooting (Scene Intelligent Auto)
Take the picture.
4
Press the shutter button completely to

take the picture.

The captured image will be displayed
for approx. 2 sec. on the LCD
monitor.
After you finish shooting, push down

the built-in flash with your fingers.
51