Wall-Mounting Placement - Linksys EA-Series User Manual

Linksys EA-Series

Wall-mounting placement

The router has two wall-mount slots on its bottom panel The distance between
the slots is 82 mm Two screws are needed to mount the router
Suggested Mounting Hardware
7-8 mm 1 5-2 mm
NOTE
Cisco is not responsible for damages incurred by unsecured wall-
mounting hardware
Follow these instructions:
1. Determine where you want to mount the router Make sure that the wall
you use is smooth, flat, dry, and sturdy Also make sure the location is
within reach of an electrical outlet
2. Drill two holes into the wall Make sure the holes are 82 mm apart
3. Insert a screw into each hole and leave 3 mm of its head exposed
4. Position the router so the wall-mount slots line up with the two screws
5. Place the wall-mount slots over the screws and slide the router down
until the screws fit snugly into the wall-mount slots
Wall-mounting template
Print this page at 100% size
Cut along the dotted line, and place on the wall to drill precise spacing
82 mm
3-5 mm
Product Overview
2 2