Atohm Furtive 1.1 Manual

Table of Contents

Download this manual

Thank you for choosing to purchase an Atohm product.

A great deal of effort has gone into designing and manufacturing this product to the

highest possible standards and to suit your requirements, whether it be for your stereo,

multichannel, Hi-Fi or home theater system. Our products are renowned for their

exceptional performances and unrivaled reliability, which will provide you with entire

satisfaction for many years to come.

Unpacking

Our speakers are packed in a fabric pouch and are well protected by foam inserts and

double layer cardboard packaging. This guarantees the best possible shipping conditions from

our assembly line to their final installation in your home.

To avoid any damage when unpacking and installing, we recommend extreme care when

handling the speakers. We advise you to conserve the original packaging for any future

transportation purposes.

Once you have decided where to place your speakers (see the paragraph about

Positioning), screw the metal bracket onto the wall using a spirit level to ensure that it is

straight. The oblong shaped hole in the metal bracket will help you to find the correct

horizontal position for your speaker (Fig. 1).

Atohm Furtive 1.1

Great sound......of utmost delicacy !

Fig. 1

Fig. 2

Table of Contents

Do you have a question about the Furtive 1.1 and is the answer not in the manual?

Page 1 Atohm Furtive 1.1 Great sound..of utmost delicacy ! Thank you for choosing to purchase an Atohm product. A great deal of effort has gone into designing and manufacturing this product to the highest possible standards and to suit your requirements, whether it be for your stereo, multichannel, Hi-Fi or home theater system.
Page 2 Positioning the speakers To ensure perfect quality sound reproduction for music and films, we particularly recommend that you combine our Furtive 1.1 speakers with the FURTIVE subwoofer or with RAFALE V38 subwoofer. Loudspeakers in the Furtive range are not magnetically shielded and may cause interference with cathode ray tube screens.
Page 3 5.1 Configuration The two front channels and the subwoofer are positioned in the same way as for the 2.1 configuration. The center speaker is placed either just above your screen or just below, depending on your layout. The rear speakers should be positioned as close as possible to the listening area; in other words, not too close to and not too far behind the listener to ensure an accurate...
Page 5 This acoustic loudspeaker is in compliance with the RoHS Directive 2002/95/CE on the restriction of use of hazardous substances in consumer electronics. It also complies with the WEEE Directive 2002/96/CE on electronic waste disposal. Please note that this product must not be disposed of along with ordinary household garbage.