Breville vkj784 User Manual page 8

Cleaning
Always switch off and unplug your HotCup™ water dispenser and allow it to
completely cool before cleaning. Never immerse the base unit, power cord or
plug in water or any other liquid. Do not use harsh abrasives, chemicals or oven
cleaners.
Emptying your HotCup™ water dispenser
1. After your HotCup™ water dispenser has completely cooled down, unplug it from the
mains supply socket.
2. Press the lid release button.
3. Hold your HotCup™ water dispenser over a sink and pour the water out.
4. Still holding your HotCup™ water dispenser over the sink, turn it the right way up
and allow any water to drain out of the dispensing nozzle. If no water drains out of
the nozzle, it may be because the stop button has been accidentally or intentionally
pressed. Press the start button to allow water to drain from the nozzle.
5. Repeat steps 3 and 4 until all the water has been emptied from your HotCup™ water
dispenser.
If your HotCup™ water dispenser will not be used for an extended period (e.g. if you are
on holiday), we recommend that you first empty it. Before using your HotCup™ water
dispenser again, carry out several boil cycles discarding the water each time.
Cleaning
Clean the exterior surface of your HotCup™ water dispenser with a damp cloth and then
polish it with a soft, dry cloth. Do not use steel wool pads or harsh/abrasive cleaners.
8