Advertisement
Weight:.........1.450 g. RTF less battery (50 oz)
Radio: 4+ channel with 4 sub-micro servo(12g.)
Required radio, motor and battery
Radio equipment:
•
Minimum 4-channel radio system
•
5 digital sub-micro servo, recommended JR PROPO DS386, DS385 or DS381
•
2 servo extension 600mm, for elevator and rudder servo
2 servo extension 200mm, for aileron servo
•
Recommended electric motor for best performance:
Hacker A30-14L + X40 SBec-Pro controller + APC 14x7 E
•
Recommended Li-Po battery pack for best performance:
•
Thunder Power 2700-3S......or larger size for longer flight time
Additional required item, tools and adhesives
Tools:
• Drill
Drill bits: 1,5mm, 2mm, 3mm
•
• Phillips screwdriver
• Hobby knife
• Soldering iron
Adhesives:
• thin CA
• medium CA
Warning
This RC aircraft is not a toy!
If misused, it can cause serius bodily harm and damage to property. Fly only in
open areas, preferably in official flying sites, following all instructions included
with your radio and motor.
Before starting assembly
Battery: ..........Thunder Power 2700-3S
Propeller: ....................... APC 14x7E
2
Advertisement
