LG KF-20P31 Service Manual page 39

DECK MECHANISM DISASSEMBLY
2. Plate Assembly Top (Fig. A-2-1)
1) Unhook the (H1) and separate the Left Side.
2) Unhook the (H2) and lift up the Plate Assembly Top.
NOTE
(1) When reassembling, confirm (A),(B) Part of the Plate
Assembly Top is inserted to the (L),(R) Grooves of the
Bracket Side(L) and Bracket Assembly Door.
Plate Assembly Top
(L)
(A)
Bracket Side (L)
3. Holder Assembly CST (Fig.A-2-2)
1) Push the Lever Stopper (R) in the direction of the arrows
(A) and move the Holder Assembly CST.
Holder Assembly CST
2) Push the Bracket Assembly Door to the right and lift up
the Holder Assembly CST along the Guide Groove of the
Bracket Assembly Door.
Guide Groove
Bracket Assembly Door
Holer Assembly CST
4. Guide CST (Fig.A-2-3)
1) Unhook(H3) in the direction of the arrow and separate
the left side.
2) Unhook (H4) as above No.1) and disassemble the Guide
CST in the direction of the arrow.
4-5
(R)
(B)
Bracket Assembly Door
Lever Stopper (R)
(A)
(H3)
Bracket Side (L)
5. Bracket Side(L) (Fig. A-2-4)/
Bracket Assembly Door (Fig.A-2-5)
1) Remove the Screw (S4) and disassemble the Bracket
Side(L) in the front.
2) Remove the Screw (S4) and disassemble the Bracket
Assembly Door in the front.
6. Arm Assembly F/L (Fig. A-2-6)
1) Push the Arm Assembly F/L to the left and lift up it.
NOTE
(1) When reassembling, confirm that the Gear(A) of the Arm
F/L and the Gear(B) of the Gear Rack F/L are assembled
as below.
Gear (A)
Gear (B)
7. Lever Assembly S/W (Fig. A-2-7)
1) Hook the Spring Lever S/W on (H5).
2) Lift up the left side of the Lever S/W from the Groove(A)
of the Chassis.
(H5)
Bracket Assembly Door
Spring
Lever S/W
(H5)
(H4)