Related Manuals for MIFI HX-G668A
Summary of Contents for MIFI HX-G668A
-
Page 1: Quick Start Guide
HX-G668A Quick Start Guide -------------------------------------------------- version: 1.0 ------------------------------------------------- Amiline.com... -
Page 2: Chapter 1 Product Introduction
Chapter 1 Product introduction 1.1 Package list 3G mini Gateway Power adapter Y-shaped USB cable 3.7V 1500mAh Li-ion battery WAN/LAN adapter 1.2 Product appearance and LED indicators Amiline.com... - Page 3 LED instructions: Power Power switch on Blue Recharge when power switch is off, LED off after recharge finishes Purple Recharge when power switch is on Battery Blue Power enough Blue/Purple alternate Low power critical point Purple Lower power and recharge is needed Wi-Fi Blue Wi-Fi on, WAN/LAN cable unplugged...
- Page 4 Chapter 2 Router Set-up 2.1 Hardware set-up Before router’s set-up, please correctly link according to following steps. In order to achieve product’s wireless functions, please put the router in the middle of covered area. 1. Power supply for router. Supply methods: battery, power adapter, PC. Power recharging method introduction: (1) Supply by power adapter or PC, power off.
- Page 5 3. Through USB connector, insert Data card into router. 4. Make sure WIFI function is on and works normal, connect to router through WIFI. Amiline.com...
-
Page 6: Administration Interface
Chapter Administration Interface Log-on This chapter mainly introduces how to use router settings. After confirming wireless connection to device, please set up the router according to following steps. 1. Open Web browser, input “192.168.1.1” in address bar, and press enter. 2. - Page 7 Note: router is compatible with WCDMA, EVDO, TD-SCDMA data cards, here is a WCDMA data card example. Network info: Signal, currently registered network, ISP, connect status ：Signal ：ISP ：Network mode ：Disconnected ：Connected Connect status: Displays current network upload and download speed rate, current add-up network flow and sum-up network flow information.
- Page 8 Chapter 4 Load Default Settings You need to reconstruct the network or you forget the changes of some parameters, you can choose to restore factory defaults and reconfigure the device. 1. Reset: Press and hold it for 5 seconds to restore the factory defaults, 1 second to reboot device.
Need help?
Do you have a question about the HX-G668A and is the answer not in the manual?
Questions and answers