Operating Instructions Battery Charger HS 12/24-30 Charger for 12 V and 24 V lead-acid batteries, charging current up to 30 A Part-No. 323 996 (Englisch) 01/09 ELEKTRON-BREMEN GmbH Am Hohentorshafen 17-19 D-28197 Bremen Phone: +49/421/54906906 ·Fax: 5490619...
Page 2
Wiring examples for simultaneous charging of several batteries Voltage selector switch Charging cable, red clip (+), (0 = OFF) black clip (-) Charging current indicator Battery type changeover switch the charging current flowing is (at bottom of the charger) indicated (I = nominal current) Backup mode normal duty / Floating charge, illuminates green...
Page 3
2.0 Description of the unit Charging characteristic ventilated areas. Explosion hazard IUoU on account of generation of With the battery charger HS 12/24-30 (in the Protection type IP 21 oxyhydrogen gas! following „HS“) all 12- and 24V wet batteries ...
Page 4
Charging current indicator Exhausted batteries Battery voltage has to be at least 0,6 V. Charging indicators (2) illuminate. The HS also detects exhausted batteries When only the last LED (0%) is still 3.2 Backup mode The present charging current is being and will commence the charging process illuminated, the battery is charged.
Need help?
Do you have a question about the HS 12/24-30 and is the answer not in the manual?
Questions and answers