Yamaha ET250D Supplementary Service Manual page 6

Tightening torque :
First tighten the bolt to a torque of
A
then loosen it.
Retightened bolt to a final torque of
B.
A.:
10m-kg (72 .5 ft-Ibl
B. : 6 m-kg (43.5 ft-Ibl
B.
Starter
The air duct is no longer provided because
there will be no problem of overheating. Ac-
cording ly, the insert for mounting of the air
duct on the starter case is no longer used.
1. Air duct .. . No longer used
2 . Screw ... No longer used
3. Plain wash er ... No longer used
4. Starter case
NOTE:--------------------------
. The 1979 model can also be used without
installing the air duct.
1980 ET250D
- 5 -