Advertisement
Quick Links
V
D
S
V
D
S
For updates and support, visit www.draytek.co.uk
Note: Product specification is subject to continuous evolution which may
not always be reflected in current documentation. For the formal specification
and details of the supported features of your product, please refer
Warranty
We warrant to the original end user (purchaser) that the modem will be free from any defects in workmanship or materials for a period of two (2)
years from the date of purchase from a DrayTek authorized dealer in the UK/Ireland. Please keep your purchase receipt in a safe place as it
serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either
parts or labor, to whatever extent we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new
or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the
product is modified, misused, tampered with, damaged by external factors, used with unapproved accessories or subjected to abnormal working
conditions. Warranty applies to hardware only, not software or firmware. Defects which do not significantly affect the usability of the product will not
be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or changes.
European Community Declarations
Manufacturer:
DrayTek Corp.
Address:
No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product:
Vigor130
DrayTek Corp. declares that Vigor130 is in compliance with R&TTE Directive 1999/5/EEC, Electro-Magnetic Compatibility (EMC) Directive
2004/108/EC, EN55022/Class B and EN55024/Class B and Low Voltage (LVD) Directive 2006/95/EC (as per EN60950-1). Product is compliant
with 47 C.F.R. Part 68.The product is designed for use in the UK & Ireland.
Join the UK mailing list
Firmware & Tools Updates
V
i
g
V
i
L
2
/
A
D
L
2
/
A
D
Quick Start Guide
Guide Version: 1.02
November 2014 / Firmware V3.7.5.1
only to the web site at www.draytek.co.uk
o
r
1
3
0
g
o
r
1
3
0
S
L
2
/
2
+
S
L
2
/
2
+
Users in the UK & Ireland can sign up to our mailing list which
goes out approximately 4 times per year with products news,
updates, hints & tips and offers. For details, please visit
www.draytek.co.uk/list
Due to the continuous evolution of DrayTek technology and
emerging risks, router firmware updates may be issued. Please
consult the DrayTek web site for more information on newest
firmware, tools and documents.www.draytek.co.uk (For
UK/Ireland)
M
o
d
e
m
M
o
d
e
m
Advertisement
Summary of Contents for Vigor Vigor130
-
Page 1: Quick Start Guide
Product: Vigor130 DrayTek Corp. declares that Vigor130 is in compliance with R&TTE Directive 1999/5/EEC, Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC, EN55022/Class B and EN55024/Class B and Low Voltage (LVD) Directive 2006/95/EC (as per EN60950-1). Product is compliant with 47 C.F.R. Part 68.The product is designed for use in the UK & Ireland. - Page 2 The Vigor 130 comes preconfigured for most UK ISPs. Therefore, in most cases you do not need to perform any setup of the Vigor 130 at all. You only need to physically connect it (plug it in) and then configure your connected router/firewall.
-
Page 3: Package Contents
Package Contents Quick Start Guide RJ-45 Cable (Ethernet) (This document) (Connects to your router) UK-type power adapter RJ-11 to RJ-11 cable (Connects to your DSL line) -
Page 4: Descriptions Of Components
Descriptions of Components Status Explanation The system is not ready or has failed. Blinking The system is ready and operating normally. Ethernet LAN (RJ45) is connected. Ethernet LAN is disconnected. Blinking Data is transmitting (sending/receiving). This LED has no function in bridge mode currently. DSL connection synchronized. - Page 5 2. Connect the LAN port to your router or computer with the RJ-45 cable. 3. Connect one end of the power adapter to the Vigor 130 and to a suitable mains outlet.
-
Page 6: Setup And Configuration
The Vigor 130 comes preconfigured for most UK ISPs already so no actual setup of the Vigor 130 is normally required in the UK. You do not need to access the Vigor 130’s own web/user interface. Instead, just connect the Vigor 130’s Ethernet (RJ45) interface to your router’s Ethernet (RJ45) WAN... - Page 7 UK ISPs, you do not need to change anything. DSL Status If you have already connected your Vigor130 to your DSL line, you can check the Online Status>Physical Connection menu which will confirm your connectivity and connected speed (e.g. 56.2Mb/s as shown below): The Internet Access menus do not need to be changed for most ISPs.
- Page 8 Internet Access/General Menu The default settings do not normally need to be changed. You can enter your ISP’s name in the first box if you wish: PPPoE/PPPoA Menu These are the settings for ADSL/VDSL, and also do not normally need to be changed.
- Page 9 MPoA Menu MPoA is rarely used by ISPs in the UK, so this menu should normally stay disabled, as shown here:...
- Page 10 The support department can arrange repair or service if then deemed necessary. The standard Vigor 130 warranty is ‘Return to base’ (RTB) unless you have VigorCare which provides enhanced services (see www.draytek.co.uk/vigorcare).