Page 1
4] Important Note on Switching ..... 7 5] Specifications ..........8 Users Manual 6] Warranty and Service......... 9 ELIXIR USERS MANUAL VERSION-1, MAY 2006. CONTENTS COPYRIGHT BUZZ AUDIO LTD 2006. PO BOX 6677, TE ARO. WELLINGTON, NEW ZEALAND. VOICE/FAX 64+4+385-2478. www.buzzaudio.com email management@buzzaudio.co.nz...
Page 2
If you wish to use the Elixir preamp with condenser Attach the Elixir front panel to the front of the rack with microphones (or any device requiring +48V phantom screws supplied by your rack manufacturer. This is power) then the chosen rack power supply will need the important for mechanical rigidity.
Page 3
10dB less than indicated. [2] MUTE This switch allows you to shut down the output of the Elixir module which is very handy when changing inputs, moving microphones around the studio etc.. The output is muted in the I (in) position and un-muted in the O (out) position.
Page 4
Controls and Indicators continued… [8] LED Meter Output level of the Elixir is displayed by this peak reading meter with indication at -10, 0, +10 and the impedance seen by the source at the input of the +20 decibel points. The Elixir module is capable of preamp.
Page 5
DC phantom power, as supplied by rack power supply. •Standard Product Warranty Buzz Audio guarantees the Elixir to be free of defective materials and/or workmanship for a period of 1 year (12 Specifications are typical of a production unit and are subject to...
Page 6
The Extended Warranty is transferable to the new owner if you on sell the unit during the warranty period. ELIXIR USERS MANUAL VERSION-1, MAY 2006. CONTENTS COPYRIGHT BUZZ AUDIO LTD 2006. PO BOX 6677, TE ARO. WELLINGTON, NEW ZEALAND.
Need help?
Do you have a question about the elixir and is the answer not in the manual?
Questions and answers