Remote Control Transmitter - Panasonic TH-42LF25U Operating Instructions Manual

Remote Control Transmitter

ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
Standby (ON / OFF) button
The Display must fi rst be plugged into
the wall outlet and turned on at the power
switch (see page 9).
Press this button to turn the Display On,
from Standby mode. Press it again to turn
the Display Off to Standby mode.
POS. /SIZE button
PICTURE button
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 11)
Basic Controls
OFF TIMER button
The Display can be preset to switch to stand-by after
a fi xed period. The setting changes to 30 minutes,
60 minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
30 MIN 60 MIN
0 MIN
When three minutes remain, "OFF TIMER 3 MIN" will fl ash.
The off timer is cancelled if a power interruption
occurs.
AUTO SETUP button
Automatically adjusts the position/
size of the screen.
SET UP button
SOUND button
Volume Adjustment
Press the Volume Up "+" or Down "–"
button to increase or decrease the
sound volume level.
R button (see page 14)
Press the R button to return to
previous menu screen.
RECALL button
Press the "RECALL" button to display
the current system status.
Input label
1
Aspect mode
2
Off timer
3
The off timer indicator is displayed only
when the off timer has been set.
Clock display
4
4 10:00
Digital Zoom
90 MIN
1
PC
2
4:3
OFF TIMER 90MIN 3
13