NETGEAR GS700AT Administration Manual page 2

GS700AT Smart Switch Software Administration Manual
• Chapter 6, "Managing Security"
• Chapter 7, "Monitoring the Switch"
• Chapter 8, "Maintenance"
• Chapter 9, "Online Help"
• Appendix A, "Default Settings"
feature values.
Note: Refer to the product release notes for the GS700AT Smart Switch Software
application level code. The release notes detail the platform specific functionality
of the Switching, SNMP, Config, and Management packages.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical Conventions. This manual uses the following typographical conventions:
Italics Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
URL links
italics
• Formats. This manual uses the following formats to highlight special messages:
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
About This Manual
describes how to configure security.
describes how to configure switch monitoring.
describes the firmware upgrade procedure and reset functions.
describes how to obtain online help and support.
gives GS700AT Smart Switch specifications and lists default
equipment.
v1.0, October 2008
-ix