Key To Symbols And Safety Instructions; Key To Symbols; Safety Instructions - Worcester Greenstar Danesmoor Utility ErP 32/50 User Instructions

1

Key to symbols and safety instructions

1.1

Key to symbols

Warnings
Safety instructions in this document are
framed and identified by a
warning triangle which is printed on a grey
background.
The following keywords are defined and can be used in this
document:
• NOTICE indicates a situation that could result in damage to
property or equipment.
• CAUTION indicates a situation that could result in minor to
medium injury.
• WARNING indicates a situation that could result in severe
injury or death.
• DANGER indicates a situation that will result in severe
injury or death.
Important information
This symbol indicates important information
where there is no risk to people or property.
Additional symbols
Symbol Meaning
1. a numbered step in an action sequence
▶ a step in an action sequence

a reference to a related part in the document or to
other related documents
a reference number to identify or refer to a part or
1
item
• a list entry
– a list entry (second level)
Table 1
Examples of additional symbols used
A numbered step in an action sequence
A sequence of numbered steps or actions carried out in a
specific order to complete a task.
1. First action
2. Second action
3. Third action
etc.
Greenstar Danesmoor Utility ErP – 6 720 813 330 (2014/09)
Key to symbols and safety instructions
A step in an action sequence
A sequence of defined actions or steps carried out in order to
complete a task.
▶ Action
▶ Next action
▶ etc
A reference to a related part in the document or to other
related documents.
To refer the reader to a specific figure/table/section within the
manual.
 e.g. figure 1.
A reference number to identify or refer to a part or item.
In a related figure, items or parts identified by a sequential
number.
List entries, first and second levels
• A single component/item
• A component/list, made up of multiple parts/items.
– Sub component or sublist of main component/list.
– etc.
1.2

Safety instructions

These operating instructions are intended for the user of the
heating system.
▶ Read any operating instructions (boiler, heating controls,
etc.) carefully before operation and keep them.
▶ Observe the safety instructions and warnings.
Oil fumes or leaks from the appliance
If you smell oil fumes, observe the following rules.
▶ Extinguish any naked flames
▶ Isolate the electrical supply
▶ Isolate the fuel supply to the boiler
▶ Open windows and doors
▶ Rectify the fault
Health and safety
The appliance contains no asbestos and no substances have
been used in the construction process that contravene the
COSHH Regulations (Control of Substances Hazardous to
Health Regulations 1988). Where applicable, the CE mark
indicates compliance with relative EU Directives.
3