Charge Meter; Before First Use; Charging - Philips Norelco S7720 User Manual

ENGLISH
14
C
◗ Travel Lock
The shaver is equipped with a travel lock function.
You can use the travel lock function when you are
going to store the shaver for a longer period or if
you are going to take the shaver with you when
traveling. See 'Travel Lock' section for instructions
on how to use this function.

Charge Meter

◗ Charge Meter monitors amount of remaining
battery power available. Remaining battery
capacity is based on the amount of power
consumed shaving per minute and is
dependent upon your skin and beard type,
whether you use pre-shave lotion, and how
often the styler is used.
◗ Initially your shaver may need to go through 2
or 3 full charge/recharge cycles before
remaining battery capacity indicators begin to
display your accurate battery power left.

Before First Use

◗ Charge the shaver before you start using it
(see 'Charging'). Make sure the shaver is
switched off before you start charging it.
◗ Remove any sticker or protective foil from
the display before using shaver.
Important
◗ Only use the power cord or SmartClean
System provided to charge the shaver.
◗ The power plug transforms 100-240V AC to
less than 24V DC.

Charging

◗ Charging, recharging or storing at
temperatures below 40ºF or higher than 95ºF
adversely affects lifetime of batteries.
◗ Charging or recharging requires one full hour.
◗ A fully charged shaver has a shaving time of up
to 50 minutes.
◗ You may recharge when the display indicates
the battery is almost empty.
◗ This shaver will not operate corded directly
from the electrical outlet.
◗ Do not charge the shaver in a pouch or travel
case.
C
1 Connect cord directly to shaver (1) and
connect the power plug into any 100V to
240V AC outlet (2). Use only the power
cord provided.
2
1
◗ An adaptor plug may be necessary for power
cord usage in some foreign countries. Use
an attachment plug adaptor of the proper
configuration for the power outlet.
ENGLISH
15